Kolin DLT 2711m

0281,0288,0285. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electronicshelponline.blogspot.com/
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

Try another cord/charger with the EXACT same power specs. If you have a multimeter, verify DC voltage at the AC jack plug. If the AC jack, in the laptop, has been pulled, damaged, it's may have a loose connection. You didn' say if ANY LED's, battery charge, work? If the battery is charged and it doesn't start on battery only, then you have other issues. It may need a ride to a Qualified Computer Tech.

Dear power cord is use for charging your laptop battery so if you don't use power cord then you will be unable to charge your laptop battery. But this is truth that if your battery charge is okay then no need power cord but tell me bro how can you charge your laptop battery without power cord. This is totally funny. Yes one way, that is you can charge your battery by using dc adapter. But if you do it i am saying you that you just going to spoil your laptop and also battery.

Are you connected with a box of some kind via the component input on this set? (red, green, blue connections?

If so unplug that box and wait--plug it back to see if the box will reboot and correct the issue--also you can try to swap green cable itself with blue for example and if then have BLUE issue that cable is bad.

hi misssim31, if the printer is not turning on..there might be a possibility that the power module is already faulty. if the power module light is lit up (the green light on it) try to plug the cord into different wall outlet and if it didn't worked..change the power cord and the module..and still if it didn't worked then the port on the back of the printer where you plugged the power cord is no longer working.
if you have any further question..dont hesitate to reply..
thanks

I have 2 janomes and i have a spare power cord because a similar shaped one came with a radio years ago. try ebay or and electronic store, or repairer. if they are common it shouldn't be expensive

You have to plug power cord to back enclosure and SCSI external cable 68 pin to your PC. Your PC have Adaptec card
Good luck

you have to check the back light off your lcd replace the inverter or capacitor in the power module

Possibly a power distribution board problem.
PDB requires replacement.

The number is 1-888-796-8298,you need your model and serial number,tell them what happened and they will tell you where to take it.You should have some warranty.