My 18-55mm lens isn't sharpening and makes a funny sound

Replace the broken ribbon cable in the lens

Hi, I'm pretty sure the camera is a goner because lens' aren't meant to be shoved back in. More then likely the motor and some optics have become jammed, if not broken. Repairing that usually isn't possible and if it is it tends to cost more then the camera did.

When you are cutting you want to keep the chain out of the dirt...dirt will dull a chain so fast it will make your head spin. sound like you need to have the chain sharpened..there are mini grinders available for about 20 bucks that will allow you to sharpen your own chain...if you don't want to go that route then you can take the chain to your local hardware store or possibly a tree cutting service to get it sharpened

my camera fell and tried to get the lens inn and now makes a funny noise and does not open

Maybe the drive wheel is disengaged. Some machines have you pull out the wheel on the right to wind a bobbin and yours might be pulled out. Try pushing the wheel back in to engage the machine.

Try the procedures in this tip.

hi..the reason for the problem is the
driver.U need to clean the lens that
is inside the driver.once u clean the
lens ur driver will work and doesnt
make sound.It will work properly.
For cleaning the lens u need a lens
cleaner cd.This is available outside.
try it out..
thank u..

Try cleaning your sensor manualy.

try cleaning the lens with super glue

dirty lens, broken ribbon connections or adjust the bias of the lens place at the back of the lens.....