When i connect my pen drive to pc. it detects when i try to open it says that ''please conect the device. when i go to properties it show 0 bites capacity. please advice me.

Do not use any more and get some data recovery freeware.

control panel admistrive tools,computer management,device manager scroll down universal serial bus controllers you could see a yellow question mark? right click to reinstall drivers or

insert transend pendrive go to control panel administrive tools computer management disk mangement you you can right click select properties tools check now?tick in both boxes to scan for and repair/recover any bad sectors and automaticall fix any corrupt files

hope this helps

4 GB pen drive show property as 0 byte used and 0 byte free..when subjected to open show insert disk please help!

Try a totally independant PC away from the ones you tried....if no go drive has failed and data will be lost sorry.

HI,
The only chance to get data is to try and use different card reader.

Best thing to do is format the drive. Dont go for a quick format

Try to insert it in every usb on your pc maybe its your usb port the problem!

i had purchased a pen drive of Moser Baer AZ-601USB device. previously it was working good, but since last 3 days i could not open my pen drive..it asks for formattin. i have formatted it , but after that it says your pen drive is write protected. so i could not open and use my pen drive....

so plz solve my problem to open my pen drive.

Your pendrive is affected virus and do the format both pen drives and first cheak with your usb port also once and when you are pushing the pen drive in the pc should be smoth dont press just push some times light is appear but data cabe is not connected to pc

My 2gb hp pen drive showing please insert drive error. Also property showing free space 0 bytes. Please send me hp recovery tool or any equivalent tool to solve the same problem