Please what is the passkey for HOLOX BT-321 - Holux GR 231 GPS Receiver

The passkey is 0000 You can get the manual on the link below.

http://www.uniden.com/pdf/BT109om.pdf

This bt2080 is not work with ps3 because your ps3 bt is ftp profile and it ask for pass key and we can't enter passkey in bt2080

Hi I sold cell phones for many years and I ran into this question many times hopefully I can help you.

BT passkey is your bluetooth passkey.
It usually is something simple like:

0000 or
1234
000

Hopefully one of these will work and you will be on your way.

please be kind and leave feedback that my answer was of assistance to you.

Give "0000" a try.

To put the bt-35k2 headset in pairing mode, press the ON button but hold it down for about 6 seconds. Once detected, you'll be prompted for passkey; then use 0000. Pairing will complete once authenticated.

the default passkey or PIN is 0000, afterward it should ask u for a new code,

please rate me

Whenever you connect your bluetooth (BT) headset to a BT device:

1. Set the BT device to search for other devices.
2. While the BT device is searching and the BT headset is off, press and hold the call/end button on the BT headset until it's light is constantly lit and the BT device finds it.
3. Enter passkey 0000 when asked.
   

Hi,


The passkey in the Phone prompts up only when you are trying to pair your device to another device,
So, you can provide 1234 as the password and another user who is pairing with you should also provide the same,

Incase if it is not working under Generic key or if you are facing any other problem related to Bluetooth pairing, Please contact your Service Providor and check..

try 0000 (four zeroes) or 9999 (four nines)

Try 0000 ...  That seems to be a "common" passkey for BT headsets...  That's Four Zeroes...

DLC