I replaced the contents of one 60 inch philips magnavox with another that had a badly damaged cabinet it works but cabinet frt panel buttons are different I have one connection listed keypad and the cabinet has 3 connectors listed keypad -led-rcvr does anybody have a diagram for the 7 pin keypad board?
You can also get a Factory Service manuals from www.magnavoxhelp.com. The manuals can be downloaded instantly. They are complete with over 2000 pages in all.
Their manuals cover all projection TV models with Chasis # PTV835, PTV836, PTV840, PTV841, PTV842,PTV843, PTV844, PTV847,PTV853
You will probably need the service manual for both chassis to straighten that out. I am posting a link where you can purchase one manual that covers the entire series for magnavox PTV 836-PTV 835 it has 2,440 pages. It cost 19.99 and they will email it to you and provide you with free unlimited support that goes with the manual purchase. here is the link if interested in getting the service manual.
http://servicemanuals.vstore.ca/
SOURCE: buttons won't work with different cabinet need pinout
What was the model number of the set that has the 7 pin keypad that you are needing the info on? Can you change out the front screen panels so you can use the origional controls for your chassis. If they are both 60 inch you may be able to switch out the front screen and control trims.
171 views
Usually answered in minutes!
×