Update firmware fail

1. check the manual to see if you have the correct IP address to log into the router: that is 192.168.1.1
2. here is the Linksys knowledge base page that will give you more information about your router. firmware updates can be obtained via the router.
3. you may have to set the router to " factory default" using the software that came with the router.

11.Log into router
2. Verify wireless router name( on the computer) >>> ( on/off)
3.Note router name you are connecting to.
4.. Check the laptop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set

up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to

access through a browser.
6.Note router name you are connecting to.
7. Go to the manufacturers site and update the router firmware.
this should be in the routers setup page. check your user manual for how to do a router firmware update or got to the manufactures site to follow the instruction set for this issue.
her e is the site page to go to :
http://homesupport.cisco.com/en-us/wireless/lbc/WRT54GS2
This is for all routers to set up wirelessly.

if it is working but intermittently most probably you may need to update your routers firmware online... go into your routers GUI " Graphical User Interface settigns page there should be an option for you to update the routers firmware... also try calling the routers manufacturer give them what model your router is for them to check and give you info if there are updates available for the specific router you have. if it connects it is ok it it gives an error something is incorrect in the settings.

Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Are you trying to install the router.
WRT54G v5 router has firmware issue. First you will need to upgrade the firmware of the router.
You can do it manually without the CD.
MAke sure that your computer is able to go online
through the modem.
If your computer is able to go online through the
modem
Then you need to connect the computer to the router
ad the modem to the router.
open the set up page of the router and change the
settings of the router according to the ISP.
Click Here for step by step by instructions

I had the same problem before too. Try updating the firmware. After you update the firmware for that router, it shouldnt do that anymore.

http://www.linksysbycisco.com/US/en/support/WRT54G/download

Unplug your router and plug it back in.  A power cycle seems to fix 99% of this type of problem.

reset the router and then upgrade the firmwere.

-tg

Hi margue,

What is the firmware on the router ?

Check the updated list of firmwares here.

For instructions on upgrading the firmware, click here.

After upgrading the firmware reset the router for 20 seconds.

After resetting the router, follow this :

• Connect the computer to the router.
• Open the setup page. Default password is admin.
• In Setup, click on the subtab, MAC Address Clone.
• Click Clone. Click Save Settings.
• Turn OFF the Router and the Modem. Wait for 10 seconds.
• Turn the Modem ON, wait for 10 secs.
• Turn the Router ON.
• Try going Online. You should be ONLINE !!!
• Click on the Wireless TAB, change the name [SSID].
• Change the channel to 11-2.462 GHz.
• If you want to enable wireless security, go for WEP 64 bits.
• Read this article about Wireless Security.

Hope this helps mate !
All the Best.



http://linksysfirmwares.googlepages.com

here is the model No. WRT54G located at the lower right corner at the back of the box... and the Fw ver is 7.00.1 it is also indicated at the device it self under it... in update it in to 7.00.4 thanks