How do i connect a pioneer tx-940 to a pioneer

Not a fuse for the speakers. There is a protection circuit in the unit that shuts off the audio amp if there is a problem with the speakers drawing too much current.

Hello Rontech44, your Pioneer VSX 33-TX, in its transformer has a thermal fuse, that if burned, the equipment does not turn on
If you have technical knowledge, I send you the link to download the service manual
But, I suggest you look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Rontech44, tu Pioneer VSX 33-TX, en su transformador tiene un fusible t?rmico, que si esta quemado, el equipo no enciende
si tienes conocimientos t?cnicos , te env?o el link para que descargues el manual de servicio
Sino, te sugiero busques un servicio tecnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil
http://www.kallhovde.com/pioneer/tricomp/Audio/VSX/VSX-33_35_RRV2351.pdf
https://elektrotanya.com/pioneer_vsx-33tx_35tx_sm.pdf/download.html

Replace the light bulb??

Get a RCA cable and connect from your amp where it said Sub Woofer in the Pre Out box in the back of the amplifier top left hand side and take it to the "Sub In" located in the back of your Sub woofer bottom right hand (White round connector).
Good Luck!

A TX-608 is an old school tuner with one knob and two switches. You hook up some antennas and RCA cables and manually tune it. The manual, if available, would be more like a pamphlet.

Try web searching "pioneer tx 608 manual". Lots of service manuals out there.

Features:
http://stereonomono.blogspot.com/2010/11/pioneer-tx-608-1979.html

Pioneer CD player codes for Onkyo universal remotes are: 70032, & 70101.

You can download Onkyo universal remote codes with instructions here.

I hope that helps.

check in yhe back of your amp to see if you have a pre amp power amp rca jumpers. If you do. remove these jumpers and take the pre amp out and plug it into the eq in. Then take the eq out and plug it into the power amp in. this will put your eq inbetween the pre amp and power amp. If you don't have these rca jumpers on the back of your amp, you can do the same with your tape record in and out inputs on back of amp.

pioneers are subs u have to be careful with, some subs are made for ported boxes and some arent, check if it is, tham if it is it should b tuned to about 35hz-45hz.

I use the sg 540 equalizer for cd and tuner. (I have two of them) I also use the sa 940 to power my sound. On the tuner input of the amp, i used standerd rca cables and connected it to the output of the equalizer. then i connected rca cables from the input of the equalizer to the output of the tuner. this only works when the top equalizer button is pushed on. hope it works for you.