Doesn't beep when toast is done.

normal. call Breville number in manual.

Ask a partstore..its on their data. The delay may b toast..junkyards hav them

If it is unplugged from wall there can be no beeps. , however if it beeps when not used replace it. There is no repair. Refer to instructions
the motorized LIFT & LOOK‰ button Automatically raises and lowers the carriage so you can check the toasting progress without interrupting the toasting cycle. Also use this button to adjust the volume of the toast ready alert

the motorized LIFT & LOOK‰ button Automatically raises and lowers the carriage so you can check the toasting progress without interrupting the toasting cycle. Also use this button to adjust the volume of the toast ready alert

You have to remember the batteries in those are tiny. Heat is the enemy of them and if you over charge them, they are toast.

Must have no pressure

cluch is worn or throwout fork is wedged. if there was a problem with master it wouldnt disengage now its not engaging so your cluch is toast or wedged open

I had to take my toaster outside and clean out the sidees of each slot. There was debris baked on and it had the wire frame stuck. Once I cleaned, scraped and emptied out the junk, the toaster works fine.

Hate to tell you this, but from the looks of their manuals on the similar Australian model, then no.

"When the toasting cycle is complete, the toaster will ‘beep’ to indicate that the toast is ready. No need to wait while the toast cooks."