Acme juicer will not spin. Cannot undo nut to reach motor

You may have tripped the reset button on the bottom of the juicer, just push
it back in. They really don't have to warm up, just give it a few seconds to reach
speed.

Remove 4 screws on bottom, leave center locking nut and screw
alone, and separate housing to expose wiring. Housing may be
juicy stuck together and be mindful of where everything belongs.
When reassembling you may feel resistance since you will be
raising the spring loaded motor shaft.

Juice bowl first, then the basket followed by the
shredder blade which is all held down by the
white clutch nut. If you're missing the nut ctc.
Waring at 1 800 492 7464 for a new one.

There is a reset button on the bottom of the
juicer. You will have to separate the base
by removing the 4 bottom screws and adjust
the sensitivity of the reset button turning the
small screw on it. Sorry, but forgot which
direction increases or decreases this. Had
to do it on my 21 year old Acme because of
the same problem.

GOOGLE ACME JUICER PARTS. THE PARTS
YOU ARE LOOKING FOR ARE CALLED
SHREDDER BLADE AND CLUTCH NUT.

TRY WARING AT 800 492 7464. MY 11JE IS
STILL GOING STRONG.

There should be a lug nut in the center that loosens so you can take the blade, basket & outer basket out to clean.

The cutting blade can be found at http://www.waringproducts.com/ret/.  Waring now makes the juicers.  Good luck!

change driving disc