Are all blender rubber rings the same size? - Blenders

do an online search using make and model or a small appliance repair shop in your area

I found a replacement gasket that work for the GNC on the go Shaker HL-2574 if anyone need some just send me a msg yaz109 hotmail dot com

Yes, you can order the replacement rubber gasket seal ring from nutri Bullet 600w or 900w which is the same size on ebay for $1.00.

The rubber ring goes between the jar and the blade assy housing. It never goes under the blade assy, always to the jar.

The ring itself is not available separately, you need the blade assembly part number 123250-000-000 available from Sunbeam at 1-800-458-8407.

Boy, I spent some time on this and - so far as finding an exact replacement on the Internet - I'm stumped.

But I'll tell you what I'd do, in your position.

I'd take the old worn (or split) gasket to Ace Hardware or True Value, and ask someone to match it up for you. Really, a gasket is a gasket. It's just a matter of the size, the thickness, and the "compressability" of the rubber (obviously, you'll want a soft rubber gasket). If you find one, you may want to buy two of them... just in case.

If this doesn't work, then get a square piece of rubber gasket material (Ace, True Value, Home Depot, etc.). You can either cut one yourself (use cups, jars, measuring spoons that are the right diameters to draw your two ring patterns), using an Exacto knife to carefully cut them out.

If you don't want to do this yourself, ask someone who's handy & who has a steady hand to do it for you. You can pay them with a freshly made smoothie.

1. Place glass container upside down on safe working area.
2. Place rubber gasket/ring on top of opening first.
3. Place stirring or mixing blade on top of rubber gasket/ring.
4. Take the plastic retainer and screw it on over everything previously assemble.
5. Hand tighten only enough that you can reverse the whole operation when comes cleaning and disassemble time.
   

The rubber gasket should go between the blades and the jar.

You can most likely find all kind of blender parts at www.thegourmetdepotco.com. I just bought a Krups blender rubber drive gear from that online store. It's the best lowest price, compared it to Amazon.com too. Try it.

1800KENMORE