Trying to find a driver for a Hawking web camera uc300

First of all, I dont know your cam, but 90% of the time you need to twist the lens ring on the front to adjust focus.
Hope this helps.

Not sure whether HNC or UC model - the support side where you can get the drive is http://www.hawkingtech.com/support/

there will be no win 7 driver as win 7 is no longer supported by Microsoft
to get a driver , you have to go to the manufacturers web site , find a down load for that model that is compatible for win 7 operating system
win xp is also not supported by Microsoft so there will be driver problems there as well

Yes it does, it IS Multifunction, IE: Able to do More than one thing

I can only suggest going to the hawkins website and looking at the web camera's here to identify your model. Most of them have drivers that are available on each model.

you could go to cnet.com go to downloads and then locate drivers. ps vote

I checked out the company for your UC-300 camera driver and on the site below the drivers only go up to Windows XP.

http://www.hawkingtech.com/support/details.php?CatID=33&FamID=14&ProdID=252

So I checked further and on the following site

http://www.hawkingtech.com/newdrivers.php

They have changed to newer cameras for VISTA.
Sorry about that but it looks like you will have to buy a new camera.
Microsoft or Logitech are a better choice of web cameras and give better and longer support.
Hope this is of some help. Bud

i have FUJING camera i need driver please send me someone my e mail id is [email protected]

go to http://www.hawkingtech.com/support/details.php?CatID=33&FamID=14&ProdID=252

Have you tried this page from Hawking?:

http://www.hawkingtech.com/newsdetails.php?NewsID=50