Humidifiers Logo

Related Topics:

k
kevin schoepp Posted on Jan 24, 2018

Bemis model #4973 humidifier how do change the fill light

3 Related Answers

tobecky0511

  • 10 Answers
  • Posted on Dec 11, 2008

SOURCE: We need a copy of the manual for a Bemis H12-600 humidifier

We found the manual!

Thanks anyway.

Ad

Anonymous

  • 1 Answer
  • Posted on Dec 13, 2008

SOURCE: Could you direct me to

I found your web site to be an essentially useless waste of my time, and was not surprised at all when you offered to sell me something, rather than addressing the problem.

Please stay out of my mailbox; Bemis is on my list of "Do Not Buy" products. Maybe others are as bad, but at least I can give them a try. I already know you guys are are useless sales pitch.

Anonymous

  • 1 Answer
  • Posted on Jan 26, 2009

SOURCE: fill level & digital readout (bemis humidifier)

There is a sticker that comes in the owner's manual that apparently falls out frequently. I was told that the fill level is two inches below the top edge of the reservoir. I am going to mark mine with a Sharpie since stickers have a tendency to fall of when wet.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have Bemis (Esswick) Humidifier Model # 4968. The motor runs fines however I can't get the humidity in my above 30%. I changed the filter and it was close to 45% for a few days but running continuously,...

You should be able to get a higher humidity rate at normal settings. If you want high humidity above 40% that should be easily done with the high speed operation. The unit may need a good internal cleaning, and use a Vinegar solution to clear any Calcium or other mineral deposits from the misting ports and misting elements. You must use only Distilled or Filtered water, not tap water.
0helpful
1answer

My unit has a new filter, all parts seem to be in place, it has filled with water. It does not turn on no matter how high I turn the humidistat.

is the water fill rod in place with float attached, and the opposit end in the switch hole? does the humidistat clik on and off when turned (just clik) put your finger or a pencil in the hole on the underside and try again. its prolly the float poor design...
0helpful
1answer

Fill level & digital readout (bemis humidifier)

There is a sticker that comes in the owner's manual that apparently falls out frequently. I was told that the fill level is two inches below the top edge of the reservoir. I am going to mark mine with a Sharpie since stickers have a tendency to fall of when wet.
0helpful
1answer

Could you direct me to instructions on disassembling the Bemis 500 humidifier so I can clean it, specifically the fan?

I found your web site to be an essentially useless waste of my time, and was not surprised at all when you offered to sell me something, rather than addressing the problem.

Please stay out of my mailbox; Bemis is on my list of "Do Not Buy" products. Maybe others are as bad, but at least I can give them a try. I already know you guys are are useless sales pitch.
1helpful
1answer
0helpful
1answer

Moisture not coming out

i realize this answer is a year old; but, i would guess you didn't let the wick become saturated before running. fill the resevoir with water, then let the humidifier sit idle while the wick is saturating. when it is completely saturated, the refill light will go off. refill the resevoir with additional water, as needed. then you can run the humidifier.
0helpful
1answer

Fan runs but no change in the humidity. I can run the fan at the highest setting and go a week or longer with out refilling the water jugs

I have same problem. Water does not come out of the bottles. One bottle empties first. the valve at bottom may be too tight. I loosened the left bottle cap and that released enough water to fill the tray and get to the wick element. I don't know why or how it knows one bottle is empty and changes over to the other, or how it only meters out enough water to fill the tray since there is no moving parts.
Not finding what you are looking for?

325 views

Ask a Question

Usually answered in minutes!

Top Bemis Humidifiers Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Bemis Humidifier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...