Where can I buy a TOSHIBA 19HLV87 TABLETOP BASE PEDESTAL STAND? I've misplaced the original. (I had the unit hanging on the wall; now I don't know where I put the original base.)

Contact the nearest authorised service center for Toshiba at your town. They can either supply a new one, or can give details about it availability to you.

TvPartsGuy.com carries lots of original pedestal stands for LCD & Plasma Tv's.
https://www.tvpartsguy.com

Here is a link to a website that sells the original stand that came with the TV. : )

http://www.retechtv.com/products/jvc-lt-42e488-tabletop-base-pedestal-stand

Hi, i have instruction on removing your base stand.

Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the stand
protruding over the edge of the surface.
Note: Extreme care should always be used when removing
the pedestal stand to avoid damage to the LCD panel.
2) Remove the jack pack cover on the back of the TV to expose
the pedestal stand screws. The jack pack cover can be removed
without tools.
3) Remove the four screws shown in the diagram below. This will
allow removal of the pedestal stand.
4) Once you have removed all four screws holding the pedestal
stand in place, remove the pedestal stand from the TV by
sliding the pedestal stand away from the TV.

Tries websites like Amazon.com,Ebay.com to buy a used base stand or a new base stand.

See page 5 of the owner manual:
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the stand
protruding over the edge of the surface.
Note: Extreme care should always be used when removing
the pedestal stand to avoid damage to the LCD panel.
2) Remove the jack pack cover on the back of the TV to expose
the pedestal stand screws. The jack pack cover can be removed
without tools.
3) Remove the five screws shown in the diagram below. This will
allow removal of the pedestal stand.
4) Once you have removed all five screws holding the pedestal
stand in place, remove the pedestal stand from the TV by
sliding the pedestal stand away from the TV.

http://www.tacp.toshiba.com/tacpassets-images/models/47HL167/docs/47HL167_om_e.pdf

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

download manual and check' page 5 'for wall mounting.

Removing the Pedestal Stand

1) Carefully lay the front of the unit face down on a flat,
cushioned surface such as a quilt or blanket. Leave the stand
protruding over the edge of the surface.

Note: Extreme care should always be used when removing
the pedestal stand to avoid damage to the LCD panel.

2) Remove the jack pack cover on the back of the TV to expose
the pedestal stand screws. The jack pack cover can be removed
without tools.

3) Remove the five screws shown in the diagram below. This will
allow removal of the pedestal stand.

4) Once you have removed all five screws holding the pedestal
stand in place, remove the pedestal stand from the TV by
sliding the pedestal stand away from the TV.


Five screws

Click here to download the user's guide and check page # 5 for instructions on how to remove the pedestal stand.