How can I get my screen to show the menu selection?

hi go into the menu select picture setting scroll down to aspect ratio select auto

regards
shaun

On systems with Windows 8 pre-installed, you can access the UEFI (BIOS) setup screens from the Windows 8 boot menu:

1. Press the Windows key + C, or swipe in from the right edge of the screen to open your Charms.
2. Click Settings.
3. Click Change PC Settings.
4. In PC Settings, select General.
5. Under Advanced startup, click Restart now. The system will restart and show the Windows 8 boot menu.
6. In the boot menu, select Troubleshoot.
7. In the Troubleshoot menu, select Advanced options.
8. In the Advanced options menu, select UEFI Firmware Settings.
9. Click Restart to restart the system and enter UEFI (BIOS).

How to access BIOS on an ASUS laptop

Turn on the projector
press MENU (as show in picture step by step)
use down arrow key and select SETUP
press ENTER
use down arrow key to select LAMP SETTING
press ENTER
menu screen below will be appeared.
ON SCREEN display
setting for lamp replacement
Has the projection lamp been replaced?
YES NO
Select YES with left arrow key (yes is preselected)
press ENTER
ON SCREEN display
lamp replacement process is now complete
press ENTER
now exit the MENU with menu key and check the lamp timer

Hello
If your TV displays a black box type shade on the screen means that your TV may be set to "Text" mode. To clear the screen, select "Caption Off mode".
To do this, press "MENU" button to display menu functions on the screen. Press "channel up or channel down" button to select the function "CAPTION". Press "Volume Up or Volume Down " button to select the mode you wish. There are five modes that you can select; Caption-Off; Caption-C1; Caption-C2; Caption-T1 and Caption-T2. As no other matereial is connected to your TV, you just select "CAPTION-OFF". When done press the Menu button again to exit menu display. Ok.

Set the shooting mode to a Creative Zone mode. Under the Setting tab, select [Live View function settings] and press SET. Select [Live View shoot] and press SET. Select [Enable] and press SET. Press the MENU button. Press SET.

To show a hidden icon on the Home screen, complete the following steps:

1. Select an icon on the Home screen of the BlackBerry smartphone.
2. Press the Menu key.
3. Click Show All.

After the Show All option has been selected, to show a hidden icon, complete the following steps:

1. Select the transparent icon on the Home screen that you want to make visible.
2. Press the Menu key.
3. Cancel the Hide Icon selection.

To hide a Home screen icon, complete the following steps:

1. Select an icon on the Home screen of the BlackBerry smartphone.
2. Press the Menu key.
3. Click Hide Icon.

To show a hidden icon on the Home screen, complete the following steps:

1. Select an icon on the Home screen of the BlackBerry smartphone.
2. Press the Menu key.
3. Click Show All.

After the Show All option has been selected, to show a hidden icon, complete the following steps:

1. Select the transparent icon on the Home screen that you want to make visible.
2. Press the Menu key.
3. Cancel the Hide Icon selection.

IN MENU--> SELECT BLACKBERRY LOGO BUTTON--> SELECT SHOW ALL.
1.To hide a Home screen icon, complete the following steps: Select an icon on the Home screen of the BlackBerry smartphone. Press the Menu key.
Click Hide Icon.
.
2.To show a hidden icon on the Home screen, complete the following steps:
Select an icon on the Home screen of the BlackBerry smartphone.
Press the Menu key. Click Show All.
3.After the Show All option has been selected, to show a hidden icon, complete the following steps:
Select the transparent icon on the Home screen that you want to make visible.
Press the Menu key.Cancel the Hide Icon selection.
4.If not able to find Install Blackberry desktop Manager ...Take Backup.. reinstall the application from application loader in Blackberry Desktop Manager

Try thisout and restore th ipod

1. Before placing the iPod into disk mode, you should verify that it is charged.
2. Toggle the Hold switch on and off. (Set it to Hold, then turn it off again.)
3. Press and hold the Menu and Select buttons for at least 6 seconds until the Apple logo appears.
4. When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
5. Connect the iPod to your computer; the screen on the iPod will change and say "Do not disconnect"

From SP510 camera switched off:
1. Turn dial on top plate to movie mode (selections from the menu screen apply to the mode the camera is set in);
2. Switch on SP510 power;
3. Press "MENU" button on back plate;
4. Select "Camera Menu" from screen if not already on it, using navigation buttons on back plate
5. Scroll down yellow "Camera menu" tabs to microphone picture (below "Digital Zoom"), which may be showing "off". Select OK and toggle yellow tab from "off" to "on", then press OK button.
6. Microphone tab should now show "on".
7. Return to main menu (press MENU button).
8. Return to image screen (press MENU button).
9. Test to see if video now records sound.
10. If is still doesn't record sound, try "reset" from video menu screen (this will reset the movie mode to factory settings, including microphone on).