I already asked the question and then had to get off the computer. The question was how do I stay on the WiFi internet through netgear router. When the WiFi symbol shows I am conneted if I go too Chro

Resolving Internet connection problems - Belkin

www.belkin.com/us/support-article?articleNum=10823

BelkinFrom wireless home networking and entertainment, to mobile accessories, energy management, and an extensive range of cables. ... Sign In · Cart0 items; Free Ground Shipping on Orders through December - Details ... How do I find my model number?... Stay tuned for exclusive offers, exciting new products and more.

My android tablet won`t stay connected to wifi network ...

www.askmefast.com > ... > Wifi

My pc tablet wont stay connected to wifi internet help ... read more ... Someone said: i have a belkin router i have just put a security setting on it all the pcs work fine put in the password but my android ..... Ok it is a slow signal using other network .... Irulutablet doesnt work unless i m in the same room with the wireless router.

Android tablet wifi authentication problem [Solved ...

www.tomshardware.com/.../43704-43-android-ta...

Tom's Hardware Guide
Nov 23, 2012 - 20 posts - ‎9 authors

Most tablets connect to the internet through WIFI. Only a few can use SIM card to connect through 3G or 4G data connection. For WIFI connection, you must have a WIFI router at home. You will normally password-protect the WIFI rounter. To connect the tablet to the internet through the WIFI-router that is in operation, you will configure its WIFI settings to match the router's password. This will be done by going to tablet's Setting, turn on WIFI, click on your router in the list of detected routers, enter the password when prompted. Ensure that Connected is shown against your router. You can then browse the internet.

Hi,
to get access to the wifi network, you need to do the following things:-
1. go to settings
2. open wifi option
3. turn on wifi
4. select the wifi network you want to connect.
5.it will ask for the password, insert the password and enjoy.
Hope you get your problem solved. Thanks

You don't need internet, to put data on a tablet (or on a computer) entering data, is typing a note, or making a picture. Then save it. That is how data becomes data. But if you want to receive data from the internet, most tablets need a wireless connection. And unless you have a hotspot close to home, the only way would be to visit a Starbucks or McDonald, where they offer free WiFi, while you are consuming there.
More and more firms offer free WiFi, when you are visiting them.
If you want WIFi at home, you first need an internet connection. If you already have an internet connection for a computer, you could buy a wireless router and connect it to the same router you already use for the computer. If you don't have an internet connection, you should get one. Most providers, now offer routers with WiFi and cable connection.
Sometimes if you have a smart phone, with internet connection, you can setup our phone as a hotspot for your tablet. But some providers try to block that.

And soem tablets do have a possibility (they cost more) to insert a sim card. For those you goto a provider and arrange a data plan for the tablet.

I hope this helps. Make sure you don't have a WiFi router, before you buy one.

Is the Netgear 95 your wifi router? If it is go to settings/wifi click in the Netgear 95 then click the little "i" on the right for more options. If you have an option to "forget this" click it. Do a hard reboot of your iPad (holding down home and lock button) till it restarts. Once it powers up go back to setting/wifi and try again to connect. That's how I got it to work on my iPhone and iPad when encountering the issue.

If that doesn't work restart your router. Last resort is to change the password but again I've never had to do that. The steps above usually did the trick.

Turn router off at wall switch, wait 5 minutes then restart.

I assume you already have WiFi, if you don't, I suggest going out to wal-mart and buying a cheap wireless router to get you started. Then the instructions should explain how to get the password set up.
If you already have WiFi and the problem is that you forgot your password, then this should be able to be fixed easily if you know or have not changed the password for your WiFi router. Below is a set of steps to resolve the issue. The only requirement is a computer connected to the same router via WiFi or Ethernet.
1. Open Command Prompt (in windows) or open Terminal (in Mac OSX) 2. In the command line, enter "ipconfig" and press enter. 3. Look for Default Gateway and remember the corresponding IP Address. (Format: ###.###.###.###) It might look like 192.168.2.1 but not necessarily. 4. Remember that IP Address (write it down, copy it, do something). 5. Open your favorite web browser and enter that IP Address into the URL box. 6. This should ask you login, if it doesn't, skip step 7. 7. use the username that you set up the router with, or if you didn't change it, try using "admin" as the username and "admin" as the password. Try not using a password. If you still can't figure it out, use google to try and find the default password for your brand of router. 8. Once logged in, you can restore factory settings, or change your WiFi Password.
#########################################################################
Having more information would have been helpful. (Aka - Router Brand, Is it your router, are any computers connected to it) Hope this was helpful.

If your ipad is connected then it might be that your router needs to reset or your internet is down. Just unplug your modem and router for 5 seconds then plug in and see if that helps it. Check if your computers can connect to the internet.

ITS.. SIMPLE JUST DO SOFT RESET AND TRY IT.........CHECK THE TYPE OF SECURITY U HAVE SET IN U R ROUTER AND BE SURE IT IS SAME WITH IT

Try resetting the router back to factory default, and set up again with a new password. What make and model of router are you using? Just ran into this issue with neighbors 2 new Kindles, which connect fine to my NetGear router, but will not connect to their Linksys WRT54GS router.