Do you have a pdf to look??

Hi there,
It looks like that may be a custom band, this site has some great bands, http://www.watch-band-center.com/shop-watchstrap.html?gclid=CjgKEAjwoJ-dBRDbjfKN7IzN0FsSJAAP0G_DR8AwTfhcxt7HHIHONLoaf1QZfq7YeqCB6Vt1_oZKV_D_BwE

you'll need to measure how wide your band is where it connects to the watch to ensure you get the correct fit.

Remove scanner glass, refix CCD cable & try. If problem persists replace CCD ribbon cable..
CCD snap shot:

You should choose a trip design band for the most basic exercise band. Strip exercise band are wide pieces of rubber cut to different lengths. The strip design is much less expensive than the tube design band.

You can take any leather band but the wide must be 22mm. I´ve a diving band from casio watches since 4 Jears. It´s still ok.

You can download the manual from http://uniden.com/pdf/TRU8885om.pdf

It can be done and not too difficult i think but look out that the leather band ain't too wide for the band orginal place,
make sure you keep all original parts in case of toruble
Post a photo if you can after the change will be nice to see the change

Tom

Blade Width is important when purchasing a band saw. Most saws accept narrow 1/8" blades for cutting detailed designs and tight curves. Better saws also accept wider blades. Wide blades don’t flex as much as narrow ones, but they make accurate straight cuts in thick stock quicker. There are also some wide blades available that can cut metal.

Uniden's website has it available as a PDF

It lloks like the video cable or inverter may be bad. Worst case scenario is the LCD may be bad. Try replacing cable or inverter first.