Panasonic MODEL NO-TC21GX20CB please tell TDA12166H1/N3/3 protection pin nuber

Just contact your bank. It may be a security issue to protect your privacy.

I suggest that you use 0000000 or as many as the nubers are supposed to be. Or go for 12345..... I have done that with my LG flat screen and it worked. I recognize that thisvanswer is not very professional since it worked for me I tell you abot it. Best of luck, kolbrun

You should refer to your wireless router setup manual for pin number....
you can also prefer this link to search modem pin no-http://www.dlink.com/uk/en/home-solutions/connect/routers/dir-615-wireless-n-300-router

master security nuber v8

Hi
PUK code is called as PERSONNAL UNBLOCKING KEY.
Your phone will ask for PUK code when you entered the PIN code wrongly several times depending upon the mobile make. The mobile asks for PUK code so that unauthorized persons do not use your mobile for wrong cause.
To get PUK code please contact your service provider through phone or go directly to their office. They will provide you the PUK code for your mobile. The PUK code for mobile phone.so that you can open your phone. When you planning to call your service provider you cannot use your mobile as it is fully locked. Please use some other mobile with same network to call your service provider.
While you get the PUK code ,the service provider customer care officer will ask for your personal details to check whether the mobile belongs to you only. If they are satisfied with your answers they will provide with the PUK code
DONOT enter the PUK code several times wrongly,It will block your sim card permanently.
This PUK code is FREE. You no need to pay any sum to get the PUK code
Thank You.

please clarify for me. what exact system model nuber do you have? or if you know it what cpu socket nuber do you have?
please repost your question with the following
1 exact name and model nuber of system. usually located on the back of the tower and sometimes right on the front also.
2 if you have opened it and had a look directly at the cpu socket you could just re post with the socket nuber.
either way i will be able to help if you tell me either of these 2 things thank you.

HI If you are asking for pin contact your service provider , he will give you a default pin . If you try pin more than few predefined no of times your phone will ask PUK code which can also be given only by your service provider which is specific for each and every mobile number . Donot try PUK code many times or else your sim will be blocked and you will need a new sim.
Contact your sim customer care department over phone. Its free of cost to get the pin or puk no.
Go to the nearest service outlet of your service provider they can also help you.
There is no other go than the above procedure only your service provider can give it nobody else in this world nor any software.

There should of been a protective screen for this model. Here are some links to obtain original replacement screens from a major Panasonic distributor if needed:

Panasonic PT-47WX49E Replacement Part Protective (Outer) Screen

Panasonic PT-47WX49E Replacement Part Lenticular (Middle) Screen

Panasonic PT-47WX49E Replacement Part Fresnal (Inner) Screen

just use zener diode 9v-12v.