<!-- from fixya rte -->What is ten times the ones place - The Learning Company Achieve! Math & Science Grades 1-3 (381933) for PC, Mac

has to be 64
Thanks for the puzzle

Your Logitech purchase is a very wise one, it will give you great service.

Claim a refund from place of purchase, I suspect one will need invoice. Go to their customer service department.

Take care!
damnor01

The answer is :
108,366

------------------------------------
Just walk your way through it a piece at a time

hundreds place: 1/3 of 9 = 3 (9 is the greatest one-digit number)

tens place 2(3) = 6
ones place: 4(3) / 2 = 6

thousands period = 3*6*6 =108

final number: 108,366

There are two possible answers to the above question, 4136 and 7348.
4136
My ones is twice my tens: The 6 (the ones) is twice as big as the 3 (the tens).
My hundreds is five less than my ones: 6 (the one) - 5 = 1
My thousands place is the sum of my tens and hundreds: 3 (the tens) + 1 (the hundreds) = 4

108366 is the answer you seek

The 6 in the millions place is 100,000 times greater than the 6 in the tens place.

Hello
To adjust time follow this.

Auto-Set Time and Date Settings

This model is equipped with the Auto-Set feature, meaning that the time and date have been programmed at the factory

and will already be set when you first plug the model in. Auto-Set will automatically adjust the time and date settings for

daylight-saving time and leap years. Auto-Set is programmed for Eastern Standard Time; if you do not live in this time zone,

you can easily switch the setting to one of six other time zones.

1. To change your time zone setting, press and hold the 8 Time Zone Button. The current Auto-Set Time Zone in the

lower-right-hand corner of the display will flash for approximately ten seconds, after which the display will revert to the

standard clock display.

2. While the Auto-Set Time Zone is flashing, press the 1 Reverse and 6 Forward Buttons to select your time zone.

The display will show each zone's current time setting. There are seven zones to choose from:

Auto-Set Time Zones

Z-01 Atlantic Standard Time

Z-02 Eastern Standard Time

Z-03 Central Standard Time

Z-04 Mountain Standard Time

Z-05 Pacific Standard Time

Z-06 Alaskan Standard Time

Z-07 Hawaiian Standard Time

3. Find your time zone, then press the 4 Enter Button or wait about ten seconds for the clock to beep twice and the

setting to lock into place.

Manual Time and Date Settings

1. To change your time setting, press and hold the J Time Set Button so that the clock display begins flashing.

2. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the time. Hold a button for a few

seconds to set the time rapidly. Be sure to set the correct AM/PM time, shown by the PM Indicator.

3. After setting the time, press the 4 Enter Button or wait about ten seconds for the clock to beep twice and the setting

to lock into place.

4. To change the calendar, press and hold the 9 Date/7-5-2 Button until the display shows the flashing year.

5. Press the 1 Reverse and 6 Forward Buttons to set the current year. When you have selected the year, press the

4 Enter Button, then use the 1 Reverse and 6 Forward Buttons to set the month/day.
6. After you have set the date, press the 4 Enter Button or wait for the display to beep twice and lock into place.

Hi,

It will be 499,995. The place value would be. Ones is 5, Tens is 90, Hundreds is 900, Thousands is 9000, ten thousands is 90000, hundred thousands would be 400000.

Hope this helps.

2614

To use the Color Correction Wizard, go to the printer's Color properties page, select User-defined color correction , then click Start Color Correction Wizard button. The Color Correction Wizard helps the user perform the following steps:

1. Choose the sample picture to be used. This can be the document that's open in the current application, or one of several samples provided by Hewlett-Packard.
2. Choose the type of correction to be applied to the picture. The brightness, the contrast, or the color balance can be varied.
3. The Wizard prints the same picture ten times with different degrees of correction applied to it.
4. Look at the printout and decide which of the ten is preferred.

A combination of corrections of different kinds can be used. For example, when selecting a brightness correction, the Wizard can be instructed to give another set of ten prints from which to select the contrast, or the color balance. When the final selection is made, the combination of corrections that have been chosen will be saved. This combination may be saved and used in future whenever selecting User-defined color correction .