At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
If it is not charging you first need to make sure your charger is good. If it is not replace it, if it is then your headset batter is probably bad and you will need to replace the headset.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I know this isn't exactly what you're looking for; and if we knew the type of connector for the charge unit, we could probably find the power + & - pinouts. I still have a few of these power supplies laying around, and if I find one; I'll try to revisit; but to be honest; I really don't know where they are right now.
Still, it doesn't look that difficult to open up. I'm including a link to an Instructable which shows you how to do this. I've usually found that when it comes to DC, the positive is always red, the negative is usually black, and that always seems to hold true. Once you get a look see, I'm sure it's easy after that. Good luck, and be sure to rate this if you're helped by this response. Cracking Open The Motorola HS820 Bluetooth Headset
Your charge cord may fit, but it may not be configured to your phone. I just bought a new Nexus phone that has the same charge port as my older Galaxy 4s phone. The Nexus charge plug fits into the Galaxy 4s charge port with no problems but does not charge after plugged into outlet. But the older charge cord will work with the new Nexus charging wise but data transfer will not work. So you may have a charge cord that plugs into phone, but may be configured differently due to phone manufacturer. Hope this helps.
siga los pasos del manual de usuario haciendo clic aqu?. si necesita ayuda, por favor h?gamelo saber y voy a estar encantado de ayudarle.Gracias, Midwest-tek
Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone
×