Question about Pioneer PureVision PDP-4340HD 43 in. Plasma HDTV
Posted by Anonymous on
You need the pioneer media cables hooked up to the media receiver to the plasma unit itself. each end has 2 different plugs. one has 2 thumb screws and the other is a squeezable end that clicks into place. They MUST be on before you plug in any power what so ever!!!! And yes, other information is being passed through.
Posted on Feb 10, 2008
SOURCE: My pioneer plasma tv is
My initial response is "An S-Video Cable"... but I suspect this isn't the information you are seeking.
You don't need to connect your receiver to the TV's video inputs UNLESS you want the receiver to switch between different video devices.
PS - more information on what "my receiver" is would help too, also tell us what you're trying to accomplish as the end result.
tell us about all the equipment you have, and how you would ultimately like to be able to control everything, and what inputs and outputs are on each device.
Posted on Feb 22, 2011
How many times this standby/power light blinks at one time switch ON?Count it carefully.These blinks are fault indication, and known as blinking codes.From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV.This will make repair easy. For more information, check the link http://electronicshelponline.blogspot.com/ Pull up older posts.
Posted on Nov 28, 2013
Tips for a great answer:
Nov 28, 2013 | Pioneer PDP-4350HD 43 in. Plasma...
Jul 23, 2012 | Pioneer Televison & Video
Feb 22, 2011 | Pioneer Televison & Video
Dec 14, 2010 | Pioneer PDP-4350HD 43 in. Plasma...
Oct 26, 2010 | Televison & Video
Sep 18, 2007 | Pioneer PureVision PDP-4340HD 43 in....
Jun 09, 2014 | Pioneer PureVision PDP-4340HD 43 in....
Usually answered in minutes!