Acer Tv AT3200A remove base

Unfortunately the stand for this TV is not longer available for purchase. What I would suggest would be searching for "Vesa stands" there are several stands that function like a vesa wallmount, but are a stand instead.

there are a number of wall mounts for tv units so talk with a salesman in a tv shop and get one that is suitable for you and the tv
if you don't have the screws , then see if he has then as well as they are a set size and length for the back of the tv

Here's some help, if you still have difficulty please repost with details of why you can't progress or what doesn't work Help Knowledge Base
Also I assumed you were in USA, sorry if I assumed incorrectly

Probably has some screws. Unscrew it.

you must google it and find it somewhere

To remove the base go to the link below. Page 24.

http://www.aocdisplay.com/envision/manuals/L32W761.pdf

Good Luck

Hi there,
Not sure if you got the problem sorted out, but yes, you can remove the part that sticks out. If you look closely, the red ""base" or bottom part of the TV housing can be clipped off without using too much force, just get your nails, or a sharp tool under the plastic, and carefully pry one side down and continue all round.then you can access four screws holding the shaft of the base on. Only way to do it. The downside is that the hole where the base shaft was is visible, Lg should maybe have provided a clip on cover for it!

There are 6 screws in the centre back of the TV, 2 rows of three. There are arrows embossed on the plastic case to identify them.

Remove all 6, then pull the stand off.

go to any Best Buy and purchase a universal wall mount they are all labeled for what they are made for EX size of tv

remove the both screws at the backside and stand will go unmounted.. now you need two stripes to hang your monitor on the wall.