Dog torn the inside sole out of a Xarby

depending on the severity, you could try shoe goo
http://www.amazon.com/Shoe-GOO-Adhesive-Clear-3-7-fl-oz/dp/B000BQR55G

I would say that they can be repaired. You can line the area where the tear is to get it fixed or you can take it to a shoe repair shop.

I would say that any shoe repair shop could take care of a repair like this. Take both along because it will look better when the repairs are made to both shoes.

These shoes seems like it may be possible to reattached soles with something like gorilla glue, but it will probably never stay. HERE you can get shoe glue which can help a lot but may its never a guaranteed. You best bet is prevention next time. Obviously whatever made the soles come off last time don't do it again. Also try protection like a waterproofer. HERE is a good waterproofer which can help from water getting in between the shoe and the soles. Hope this helps.

Wow, it's things like that that make the industry look bad. To sew the soles on Docksides or Topsiders you need a McKay stitcher. I can't imagine any shoe repair NOT having one. They are a necessity. Call around until you find a shop with a McKay stitcher.

What part of the shoe did he chew? If it was part of the sole, you could take your shoe to a boot and shoe repair and they may be able to repair it. If it's part of the shoe itself, again take it to a shoe repair store.

The quick answer is don't use a dryer is any of its components are not functioning properly.

It sounds like you culd fix this by doing as you describe. The sensor itself may have been damaged, so that needs to be checked after you make the repair.

Make sure you unplug the dryer when you work on it.

you can replacethe gears taht cause the agittion called agitator dogs part number 80040, probly $20.. reomveth efabric softener( swift smack with thepalm of you hand) and then remove the agititor with a 7/16 screw down the center shaft. the agitator will "split to reveal the "dogs" fairly easy repair

I had the same problem, WalMart has an adapter with multipule ends & the yellow one fits! It was only $10 and can work for many different things.