Laptop repair my laptop fell down from table i put off n on later i can see window opening but doesnt open it just black screen with cursur cant view or do anything

Press windows + R to run terminal then type "explorer.exe"


Windows 7 Black Screen Active Cursor on Startup Windows 7 Repair Windows 7 Black Screen of ***** how to fix blackscreen with cursor after login windows 7 Windows 7 Black Screen Active Cursor on Startup Windows 7

If you have a function button try holding it down and pressing F2, possibly the screen has been accidentally switched off.

re install your operating system

That must be a problem with the shutter not opening and letting light pass, so it is mechanical and you need to get it repaired at a shop.

Could be that a virus took out some needed files to boot to windows. Try inserting operating disc and repair MBR. Or you might just have to do a full system recovery.

Since your computer fell off a table this is definately a hardware problem, something might have shifted inside and in this case I would not recommend that you open it to see what shifted.
I would recommend that you take it to a repair store for them to pull it and fix it for you. Sorry to hear.

Hi there,

The way to find out if it's just the screen is to connect the laptop to an external monitor. Pay attention to the F keys when you connect the laptop. On most Toshibas, you'll see a small depiction on the F5 key of a laptop next to a monitor. You either have to press that key alone, or hold down the fn key and then press the F5 key and let go to transfer the signal to the external monitor.

If the external monitor shows up good and you can perform all other functions on your laptop while viewing the monitor, you need only replace the laptop LCD. If it does not display correctly, then you're into the next round of troubleshooting.

Hope it works as above.

Good Luck

Take out the battery,unplug the power cord,and hold down the power button for 30-45 seconds,Then put the battery back in,plug the power cord back in and start the computer.

hit f8 numerous times at startup, and start in safe mode