Record video not have pause button - Samsung Digimax S730 Digital Camera

The default is to start a new clip every time you press the stop button, but in settings you might be able to tell the camera to continue with the same clip provided you press record again with a set time. Not sure why you want to do this though - it's much easier to edit using small clips than very large ones.

Press the shutter release button, to start the video. (mode dial is on the video camera) Press the shutter release button again, to stop the video. When you press again, the recording starts again.
So that is like pause, because the camera is in standby waiting for the next recording.

each button on the circular bit corresponds to an action, it shows which button does which on the screen

Well... If you are looking for the pause function for the playback kepp reading. if you are trying to pause while filming go to the next paragraph.
It is verry unfortunate that while you are trying to view your video on your camcorder or while hokked into your T.V. there is no way of pausing. You can only stop and play your video and once you stop it it will restart at the beginning of the recording. To view it better and have more controll over all of the settings your best bet is to attach it to your computer,

Now if you are trying to record something then want it to stop recording all you need to do is press the little button with the picture of the video camera once more,as soon as what you want to record is complete. This will stop the recording untill you press it again when you want to record something else

Perhaps I'm not understanding your question, but if you mean simply pause while taping someone or something, you hit the record button again. This will pause, and then to restart you hit record again.

Connect with RCA cable to RCA jacks\plugs::
output [player] audio to INPUT [recorder]
OUTPUT [player] Video to INPUT [recorder]
*************************************************
Place blank tape in RECORDER, Tape that you want to record from into PLAYER.Press Record [recorder machine], wait one second, press PAUSE.( thats to give record tape "breathing" space.) Set up your player tape to start playing. When you know what you want to record, press PAUSE again to begining recording. Press PAUSE after the recorded section to install 2nd tape, etc. etc.
NOTE:: some VCRs use PAUSE 2nd time to release and continue recording, while some machines you must press RECORD button again to release PAUSE. you must expirement before begining your project.

As far as I can tell, and yes the documentation is skimpy, when you press the 'record/play' button the video recording pauses. Make sure you press the video icon button, not the 'record/play' button to get it started again. If you press the 'record/play' button, it goes into a 'play back' mode.

Hope this helps...

Do you have a remote? Some camcorders you have to hit the record pause button on the remote and then hit pause. It then begins recording. I hope this works for you.

The following Models can be used as a recorder to record from a VCR, TV or another Camcorder. 2004 - SC-D107 2003 - SC-D5000, SC-D27 2002 - SC-D180 Recording In Player Mode 1. Connect the camcorder to the VCR or TV with the AUDIO/VIDEO cable (provided) (to the A/V Outputs on External Device) 2. Set the power switch of the camcorder to PLAYER mode. 3. Turn on the VCR or TV. 4. Insert the blank tape with protection tab closed into the camcorder. If you want to record from a connected VCR, insert a recorded VHS tape into the VCR. 5. Press the MENU button, turn the MENU DIAL to highlight A/V and press the ENTER button. 6. Turn the MENU DIAL to highlight AV IN/OUT and press the ENTER button to select AV IN. "AV IN" and picture appears on the LCD monitor. OUT : Releases the INPUT mode. 7. Press the START/STOP button to set the camcorder to REC PAUSE mode. "PAUSE" appears on the LCD monitor. 8. Select the TV program or playback the VHS tape. 9. Press START/STOP button to start recording. If you want to pause recording for a while, press the START/STOP button again. 10. To stop recording, press the (STOP) button. Notes: * Recording from an analog VCR to the camcorder is only possible when the VCR is playing back at normal speed. * If you want to see the camcorder picture with a TV, set AV IN/OUT in the menu to OUT.