I just installed 2 gb of PC-3200 (400MHz)
memory...into a Foxconn 761GXK8MB-RS motherboard...the computer recognizes the memory boots up into windows xp...then system errors of software that can not boot up pop up and then the blue screen of death pops up...Please Help...I can't figure out if this is a problem with my jumper settings, or if i need to change something in the bios setup...Please Please Please Help....
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you're running Windows XP with service pack 3, your problem is actually a problem with service pack 3. Microsoft has in fact corrected the problem, so making sure that you've downloaded and installed all the updates will solve the problem. Let me know if this doesn't help, and we'll troubleshoot a little more.
Well it sure sounds like an overheating problem, and 77 degrees celcius is way too high, specialy if it's right after boot! try reseatting the heatsink and make sure the repair place put a thin coat of heatsink compound paste on the processor. You need to bring that number down so really pay extra attention to the heatsink.
The next thing would be a bad memory module check out http://www.cas411.com/ShowArticle.aspx?ID=66 , it talks about surprising behaviors of PCs when a memory goes bad.
ya cuse old moduel is slower hu drops speed back to 2700 and not 3200 ? corect its in bios settings re auto detect ram set to automatic config itself what brand ram u buy sum fox commm bords very picky on low denstiy and hi density styles ok low beter more compatble 38 bucks 1 gb on ebay ddr 400 i run 3 of those in my gigybyte moby and it loweres my ram spee dto 333mhz not 400 when i use all the slots up cheak your bios settings let me know name brand usally the pp who make it call them tell thenm and ask for time settings to be best with your mobo ok if they have great tech support if not tell me models