HIGHLIGHT THE CURRENT ROW

Hi,

Do one of the following:
To lock one row only, click on the left side to highlight the row you want to freeze, choose the View tab, and then click Freeze Top Row.

Replacing the Transfer Belt (ITB, Transfer Kit) HP Color LaserJet CP4525 CM4530
1. Open the printer's right side door.
2. Use the blue lever (see callout 1 in picture below) to lower the secondary transfer assembly.
3. Grasp the small handles on the transfer belt assembly (circled in blue in picture below), and begin gently pulling the assembly out towards you, until a set of 2 larger handles pop free on the sides of the transfer belt assembly.
4. Now grasp the larger handles on the transfer belt assembly, and continue pulling the transfer belt straight out of the printer until it is completely removed.
5. Avoid touching the surface of the new transfer belt. Install in reverse order, sliding it securely into the machine.
6. After replacing the Transfer Belt, it's a good idea to perform a Full Calibration (or even several Full Calibrations in a row, if you are having print quality issues). Full Calibrations help with print quality by aligning the color tones, the drums, and the color plane. Each Full Calibration takes about 4 minutes. To perform a Full Calibration: Press MENU to enter the menus. Press Down Arrow to highlight CONFIGURE DEVICE. Press Checkmark to select CONFIGURE DEVICE. Press Down Arrow to highlight PRINT QUALITY. Press Checkmark to select PRINT QUALITY. Press Down Arrow to highlight FULL CALIBRATE NOW. Press Checkmark to select FULL CALIBRATE NOW. Wait for the printer to calibrate (usually takes 4 minutes or so), and then print a test page. If print quality still needs improvement, repeat the Calibration. If multiple Calibrations don't help, some of the toner cartridges may need replacement.

first, highlight the entire row of first row of the section you want to flip upside down. so if you want to flip A1:G1000, then highlight row 1 by clicking on 1 on the left hand panel.
then press CTRL+SHIFT+L
then use the arrows that appear the change the orders to what you want

ArboristSite.com Chainsaw thread (free to join)
http://www.arboristsite.com/forumdisplay.php?f=9
Post 8 owns a 4600, I suggest you join and ask Red to send a photo.
http://www.arboristsite.com/showthread.php?t=36014&highlight=McCulloch+4600

McCulloch 11-600465-00 (4600) example:
http://www.ordertree.com/modelinfo/MCC/11-600465-00-MAC-4600-10%2F94-to-Current-IPL-211594/139.11-600465-00-MAC-4600-10%2F94-to-Current-IPL-211594.1.59.1.html
Cable shown on "Rear Handle Assembly" detail

McCulloch IPLs
http://www.ordertree.com/modelinfo/McCulloch/139.59.html
HTH
Lou

row of phillips screws along bottom and one behond inner door handle
pop out studs on each side
allan screws holdiong the handle- to get to these u need to find the little phillips screw above the door pocket. this releases the window switch so u can get to the allen screw

once removed..you can wiggle the panel and it will come loose

The easiest way of doing this is by inserting another row with Days
Can be MTWT etc, and you can set conditional formatting for any cell beginning with "S" into a colour/ variation of your choice.

Press menu, press 1570. Highlight negravision, on second row show 00, go to third row. Put in the following code: B0 B8 4F 04 E6 5F 87 80. Now go to second line and change 00 to 01. Go to third line and put in: A3 EB EC 07 D8 49 D2 EB. Press exit highlight EMU, toggle to 'on' All should be ok

type in the first 2 numbe you want on the spread sheet. highlight both number. you will notice a small handle on the lower right hand corner. drag that handle to the cell you want to stop and let go.

hoya!

Dear Madiha35,

 

I would recommend the use of the Table Function in Excel.

 

Here are the steps in Excel 2007, if this does not work for your version please add comment for me to reply to.

 

Conversely, If you would like the softcopy of the screenshots, I would be happy to email them to you.

 

Excel 2007 had a budget format workbook

New workbook, Select Budgets in the last hand navigation, Select Personal Budget.

 

Step 1:  Enter your data into the worksheet.

 

Step 2:  Create Table

             Highlight the relevant data

             On the insert tab, click on Table

             

Step 3:  Verify Table range is correct, Click OK

 

Step 4:  Select the cell you where you wish to Sum Data.

         Click on Autosum.

 

Step 5:  To Insert new data

         Click on the sum row in the table, (Not the entire worksheet row)

         Right click, Insert, Insert Table rows from above

 

Step 6:  Enter new data in row

 

Step 7:  Data is automatically calculated in formula.