Replacing cdj cue buttons

This probably means that one or two of the tact switches which enable the loop (loop in, loop out, reloop) is damaged and need to be replaced. In pioneer cd players when a tact switch is semi-broken, then if you press another button then it looks like you pressed that semi-damaged switch. For example you may hit "cue" and the cdj loops! It is quite common.
If you have some soldering skills this is the tact switch:
http://artaudioparts.com/product/dsg1079/

The switch under the button is most likley at fault.
Cue buttons and cue switches are available and easy to change.
Switch :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-CDJ-800-MK2-PLAY-PAUSE-CUE-TACK-SWITCH-/300408370512?cmd=ViewItem&pt=UK_Mixers&hash=item45f1bbf550

Mk1 button :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-mk1-PLAY-PAUSE-CUE-BUTTON-BANK-ASSY-/300397768495?cmd=ViewItem&pt=UK_Mixers&hash=item45f11a2f2f

Mk2 button :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-mk2-PLAY-PAUSE-CUE-BUTTON-BANK-ASSY-/260588810664?cmd=ViewItem&pt=UK_Mixers&hash=item3cac4db1a8

The switch under the button is most likley at fault.
Cue buttons and cue switches are available and easy to change.
Switch :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-CDJ-800-MK2-PLAY-PAUSE-CUE-TACK-SWITCH-/300408370512?cmd=ViewItem&pt=UK_Mixers&hash=item45f1bbf550

Mk1 button :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-mk1-PLAY-PAUSE-CUE-BUTTON-BANK-ASSY-/300397768495?cmd=ViewItem&pt=UK_Mixers&hash=item45f11a2f2f

Mk2 button :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-mk2-PLAY-PAUSE-CUE-BUTTON-BANK-ASSY-/260588810664?cmd=ViewItem&pt=UK_Mixers&hash=item3cac4db1a8

CDJ800 lasers can and do fail.

Mk1 lasers are availble here :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-MK1-CDJ-LASER-OPTICAL-PICK-UP-ASSY-NEW-/300358857324?cmd=ViewItem&pt=UK_Mixers&hash=item45eec8726c

Mk2 lasers are availble here :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-CDJ-800-MK2-LASER-TRAVERSE-DECK-ASSY-NEW-/260616571438?cmd=ViewItem&pt=UK_Mixers&hash=item3cadf54a2e

email for more details [email protected]

PART NUMBER IS DAC2059 This also includes the play button.you can order from pioneer parts on line

cue button sticking sounds like the button on the pcu board needs replaced, I would clean all the foam stuff of if possible, as for the screen not working sound like some of your wires have come unconnected easy fixed just plug them back on to the pcu board

No, the cue buttons for the CDJ800 and CDJ800MK2 are configured differently, and will not fit. You can take your existing buttons off, take them to a body shop, and have them dip it in chrome!

Hope this helps some.


- OPTiC

Pioneer DJ Repair Videos
Pioneer DJ Repair
Pioneer DJ Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

Replace the cue tac switch or worst scenario replace the cue play board.... takes 5 mins to open solder and fit back together or 2 minutes to replace board

Hope this answers your query
MBI
01273 607384

There is no easy fix for this. You will more than likely have to have the CD traverse assembly replaced - you could try a professional cleaning and alignment first - but ultimately, you will have to replace the cd assembly.

- OPTiC

Pioneer DJ Repair Videos
Pioneer DJ Repair
Pioneer DJ Parts
DJ Parts
DJ Equipment Sales
Audio Video Accessories

the faulty button will not stop it from playing well... replacing them is not hard so long as you have some experience with a soldering iron.
Clean the laser lens with a cotton bud wet with windex... then use a dry one to be sure no residue is left. If it still mistracks... new optics required!. You willl need a pioneer service agent to do this for you. A little complex for the first timer :)