Service parts list of hobart mixer a120

Question edited for clarity.
Question moved to Hobart category.

Video that might help.

https://www.google.com/search?q=Hobart+A120+strip+down

Parts Schematic

https://www.alfaco.com/wp-content/uploads/2016/11/A120-A150-Manual.pdf

..

Does the shaft the motor derives spin freely? Either the motor is being overloaded or the motor is failing.

Use the contact link at www.hobartcorp.com.

240v 12qt mixer... that's pretty unusual.

You'll have to register on this site, but you'll probably find what you're looking for here.

http://www.hobartservice.com/Manuals/

There are several possible causes:1. The blades of the beater/s may be distorted (bent) 2. The beaters are in the wrong way round 3. The bottom tray is not seated down properly - there may be something in the central hole 4. The bowl may be damaged

You need to take the old grease out and replace it with new and then replace the oil seal
by the way it is messsssssy

Hi. If the motor does not turn, the problem is electrical. Trace and test the electrical circuitry with the mixer unplugged. Start with the electrical plug and work your way through to the motor and switch connections. An electric motor technician should be called in if you are not familiar with electrical troubleshooting techniques. Good luck!.

If this solution has assisted you, please rate it. ricardok45

If the mixers are older the dive key shaft,spring or key are broken,if they are newer the key is sheared.Also check the nuts near the beater shaft and make sure there not too tight.

Please be more specific of what part you need.Whats the problem with the mixer?Im a hobart tech and service these mixers often.

goto this site http://www.hobartcorp.com/default.aspx. you will find a parts list/view. before ordering any parts i would call your local hobart branch because the part numbers have changed.make sure you have the ml number or spec number found on the data plate before hand so youll get the right part numbers.any questions let me know,i repair alot of these mixers im a hobart service tech.