How to put battery in Honora floating pearl watch

The size of the battery required for a Honora watch will depend on the specific model of the watch. However, most Honora watches use a standard watch battery known as a silver oxide battery or button cell battery. The most common size used in watches is the 1.55 volt button cell battery, which is also known as the SR626SW battery or the 377 battery.
To ensure that you purchase the correct battery for your Honora watch, it's always best to refer to the owner's manual or contact Honora's customer service for more information. Additionally, many jewelers or watch repair shops will have the necessary batteries on hand and can assist with battery replacement if needed.

Yes. A jeweler or watch repair service can change it.

Use the "******" part of the buckle to press in the dimple in the center of the back of the watch..Juse did on the on I got from Rue La La & that worked.

To set a basic wristwatch, simply pull the crown (the winder button at the 3:00 position on 99% of watches) out gently - it will click into adjusting position. Wind to send time and then push back in again.

Variations on this are: If you have a watch with date display, the crown will have 2 positions, the first click will be to set the date and the second click (fully out) is to set time. If you need to adjust the date, I suggest you wind the date to the day before you need and then use the second click to wind the hands to the correct date. This way you will be able to know if you have the hour at a.m or p.m position and avoid it have the date changing during the day instead of at night.

One last variation for wristwatches is a screw down crown. Some water resistant and sports models incorporate an added feature whereby the crown is threaded so it can be tightened down to avoid water entering - the most common place water gets into a watch! If you have one of these, you simply need to screw the crown anticlockwise until it pops out and then refer to the instructions above. Don't forget to push and screw the crown back in clockwise when you are done

Hi knbaker59; If you already replaced the battery and still not working then it will stock the machine. Its needs to clean or overhaul the machine,so it will work again and if you already clean the machine and still not working then the problem is the circuit block need to replaced a new one. Hope it may help. Feel free to ask whatever the result.
Regards: votit

This is a newer kind of movement. All you need to do is take the stem from the watch buckle and press & hold it into the circle at the center of the back of the watch. This will cause the hands to start moving and the movement to start. Once you get to the correct time, please remove pressure and the watch will be set! I hope this helps!

if you are in the USA:

• West Coast Watch Service Center Authorized, Service, Repair, and Restoration of Fine Swiss Watches.www.westcoastwatch.com

if you are in Europe:
Search Results AQUALAND WATCHES § ROLEX DEALERS IN LONDON HONORA WATCHES ... Day shipping to uk france greece brazil germany australia. ... 1350s aqualand watches no laser cooling of astronomers. Indicating eclipses or inform ...www.pokerwebtown.com/uuiwqd/aqualand-watches.html -

You can not do anything. At the point of sale your watch is brand new, but the battery was fitted when it left the manufacturer. So, put the new battery in and you will be sorted.

You have to upload here all details of the watch: model, ref. number. Movement number and good pic would be very helpfull.