There is no option that I know of, on the printer to do this. I suspect this is an option in the pos software that you are using. If you are using windows try doing a test print to the srp350ii from the printers in control panel and see if it prints once. I am pretty sure it will and that will prove that it is something in the software itself.
SOURCE: my bixolon samsung srp 350plus printer will not
Try to push just the FEED button. if it doesnt feed, call their service center. hope it is in warranty still.
Problem could have happened with a power surge
SOURCE: I have replaced a posiflex receipt printer with a
Hi.
The Posiflex was already installed in WinPos. Did you install the Bixolon POS driver correctly?
Here download page with drivers and installation guide. Ensure you follow directions in the installation guide. See also FAQ page here (you will need to register and login).
Regards.
Ginko.
SOURCE: i have bixolon srp 350
hello, im trying to send a print to my BIXOLON SRP350 Thermal printer by java codes. but java can't use the all the page width, what should i do to use all of the page width ?
SOURCE: Please help with the following: Printer
Looks like you'll have to contact Samsung http://www.samsungminiprinters.com
The operators manual does not give any indication about what to look for if the error light is on.
Here's what the manual states about the paper light:
This light indicates the near end of the paper roll. Install a new paper roll and the printer will continue printing. When the light blinks, it indicates the self-test printing standby state or macro execution Standby state when the macro execution command is used.
860 views
Usually answered in minutes!
×