How do i connect a panasonic theater system to asylvania tv

Make sure the receiver is set to use HDMI. Follow your instrution manual on how to set up the HDMI setting. Also, just try a regular HDMI cable. You don't have to spend a lot of money for the cable. All of the HDMI are the same. I was having trouble with my HDMI and read a lot about the cables so, try a $6.99 cable.
Also, make sur you have the cable push in all the way into the TV and receiver. Hope this helped.

Tex

Instead of using your tv remote, pair your sony remote to your tv. That's what I did with my Samsung tv. So use your Sony remote for your tv, just follow the instruction booklet.

You need to go into the Video menu of the device and select 'Speaker Settings'. See the manual available from Panasonic.

You will have to enable dolby prologic to get sorround sound.

Here you go!
http://service.us.panasonic.com/OPERMANPDF/SCPT760.PDF

Try tvmanualsonline.com  here is the address for your manual:
http://tv.manualsonline.com/manuals/mfg/panasonic/scpt956.html?s=fpw

http://www.pasctraining.panasonic.com/pass/elearn/Document_Downloads.htm


Try looking at the training document for your system. The answer might be there.

Moon

Did you try hitting the Doby Digital button? That is supposed to produce "fake" surround sound from sources which don't have surround sound like a tv.

You must set up the Reciever manue to accept Digiatl Audio in... refer to your manual

Your tv got audio outputs,if it got it you connect him on the inputs of the home theater sistem.