I can not get my rca remote to work on my Sanyo model DS20425

Which of the several models of RCA remotes do you have? The RCA remote code finder is available here: http://remotefinder.rca.com/default.aspx?site=rca . Select your remote, then TV, then Sanyo.

I hope this helps.

Cindy Wells
(for the RCA412C, Sanyo TV codes to try are 1004 1048 1049 1073 1080 1162 1169 1180)

look for d482 to be shorted if it is ecg 552 will replace and r482 will be open too iused a one ohm 1 wat res to replace so far it working just fine

You didn't supply enough information about the URC-20D1F or the Sanyo device. I am assuming the URC is an RCA branded device - but I can't seem to locate that model number. I don't know what an "LTD Sanyo" is - TV, VCR., ??

Regardless - RCA is also known as Thompson Consumer Electronics. They have additional information for RCA, GE and Proscan branded remote control units. Have a look at the link below - there are some Sanyo codes that may work for your device.

http://www.thompsontv.com/rcarc.html

Good luck!

CHECK THE INFRARED LIGHT ON THE REMOTE AT THE TOP.. WIGGLE IT TO SEE IF ITS LOOSE, IF SO, SIMPLY OPEN IT UP AND RESOLDER THE LIGHT... SOLDER GETS OLD AND BECOMES LOOSE SOMETIMES

Codes For Model RCR311B
Code 1004 for Sanyo TV Code 1048 for Sanyo TV Code 1049 for Sanyo TV Code 1073 for Sanyo TV Code 1080 for Sanyo TV Code 1162 for Sanyo TV Code 1169 for Sanyo TV Code 1180 for Sanyo TV

Codes found here: http://remotefinder.rca.com/default.aspx?site=rca
RCR311B manual (PDF): http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/rca/rcr311-manual.zip&area=other

need a code for neon 32"tv model no 3298

Just ask at http://manualfox.com/remote.htm
- they find you every remote code. Send them model #s of TV and remote!

BE VERY CAREFUL!! This area is part of the output transformer which produces the HIGH voltage to the screen. The one to adjust is the SCREEN control. I would be surpised if just moving the TV would have caused this to have altered.

I have an RCA remote SYSTEMLINK 8A-V and need to know how to program it to work my Sanyo Television. ...

The Sanyo part number is: 6450656934
It used to cost about $25, but is no longer available from the distributor I use. Hopefully the part number will help. Realize that most universal remotes should work just fine. Just be sure to get one that has a menu button.

Dan