I just bought Edimax wireless 802.11n Gigabit Broadband Router. I have two problems: 1) I have playstation 3 and the connection speed is not that great in both wired and wireless (PS3 always gives me NAT=2) 2) Also, Edimax disconnects me when I use my Peer-to-Peer download software in my laptop such as Frostwire. Please help

If your Home Hub is a BT type internet hub, then you can connect the WAN port to the Ethernet port on the Hub.

This means it will go through two routers. One in the Hub and another in the Edimax. The Edimax needs to be configured as a bridge, because you need to keep within the same address range as the BT router. The Edimax DHCP allocation of IP addresses need to be disabled. This is not on the web site.
EDIMAX Technology Official Website Wireless Routers 300Mbps Wireless...

It will have to be reset to factory defaults, and then re-configured

http://www.edimax.com/images/Image/FAQ/Router/General-Router/ForgetPassword-Router.pdf

Here is the manual on to set it up.
http://us.edimax.com/edimax/mw/cufiles/files/download/manual/transfer/Wireless/BR-6228nSnC/BR-6228nSnC_UserManual_v1.zip
From the manufacturers website.

Try setting it up according to the manual. If you need help you can contact the manufacturrers technical help here. Support Services

i canot?????????

Is this only while playing online? what is your intenet connection like? (ie Speed/set up)

generally if you have a router with several consoles or PCs connected, if one is demanding a lot of bandwidth (ie Gaming or downloading) this can throttle the connection for other PCs or consoles connected. This situation can be made worse if the consoles are both wireless.
A few options are:
1)Check your broadband speed - upgrade if possible
2) Check your router, does it have an option to prioritise one PS over another?
3)Connect the playstations via wired ethernet cables giving better reliability
4)Upgrade your router (or get one if you dont have one) that has a higher connection speed for internal connections. Gigabit connection should be standard though.

hope this helps

Try to download the manual from here:
http://www.edimax.com/en/produce_detail.php?pl1_id=3&pl2_id=18&pl3_id=43&pd_id=261
and just have a good read?
Merry Xmas

hi, contacted edimax and was told how to reboot the router without the disc, my original problem was a faulty filter on the telephone line which caused an ASDL failure. hope this helps

bill

please confirm if the router is a 6104K, or a KP or Wg or another model as the K and KP are not wireless, a "W" will denote wireless capability...

Not all manuals are available for download from the Edimax website but heres a start...

Connect the router to your PC with a cable... leave the modem disconnected to start with

open internet explorer and type in enter the default IP address 192.168.2.1 (broadband router’s IP address) into your PC’s web browser and press <enter>

This should bring up a user/password dialog box. By default the user name is "admin" and the password is "1234".

Confirm you are getting this far and we'll go the next steps

hello!

-- who is your internet service provider
-- what is the operating system of your computer?

you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router

HI,
  Actually in short  "you NEED A MODEM;"
In order to connect your router you need to connect a modem in "bridge mode'( bridge mode is nothing but a configuration on the modem)..


this is a picture of  rear side of a  router,,, you have to connect the modem into the wan port of the router (above),, and in port number 1,2,3,4 you can connect your computers,