Can I play playstation 3 online with a E1000 cisco router?

You can find the user manual here: http://homesupport.cisco.com/?pagename=HS%2FCommon%2FDynamicWrapper&site=HSus&application=HS&locale=en_US&ppath=supportsearch&c=Page&support_keyword=Cisco+Linksys+E1000&lang=en&keywords=Cisco+Linksys+E1000

You can find a user guide here: http://homesupport.cisco.com/en-us/support/routers/E1000

You don't need the CD. Post the make, model of computer and the OS on it.

Hello from here you can download a manual:

http://homesupport.cisco.com/en-us/support/routers/E1000

You need to install Cisco Connect software.
To reset it you have to press a small button at the back of the router
With power on.

E1000 Default Password & Other Default Login Data Version Default Username Default Password Default IP Privileges All [none] admin 192.168.1.1 Administrator
Good luck

Cisco connect is the software that comes with the router.
You might have installed the Cisco connect software while installing your router for the first time.
Once you open the Cisco connect software for E1000, you will find the password to access the wireless network.
If you have not installed Cisco connect then you can open the setup page of the router and check the wireless settings.

You will need to change the firewall settings of your router. If your Internet service provider is DSL then make sure that modem is in bridge mode. How to change NAT type to open

Have you installed Cisco connect software while setting up Your E1000 router?
If you have installed the Cisco connect then you will find all the settings there. If not then you can open the setup page of the router and check the wireless settings. Read Linksys E1000 Cisco connect

I'm confident that having both routers distributing the same subnet is causing a conflict.
You should change the Cisco router to 192.168.2.1. and let it deliver IP addresses by DHCP.

That should do the trick.

make sure you
1.install the router properly with Cisco Connect software
2, turn on wireless modem in you PC
3. check the signal receive status are found and connected.

if you still can't solve the problem you can get more technical information here.

Reset your router to factory, and install software from scratch... I need more details to help you more then this?

http://homesupport.cisco.com/en-us/wireless/linksys/E1000