LeapFrog Tag Reading System w/ Bundle - Answered Questions & Fixed issues

The one my kids had (a couple of years ago) could only hold 2 or 3 books at a time. Just limitations of the storage capacity.

Have you tried removing parental control or running it as administrator?

I tried the webpage you listed, and it transferred me to another page. You may want to try this page.http://www.leapfrog.com/en/pages/support/product_pages/leaptop.htmlI tried to download the PC version and it came up fine.Can you download anything else from other websites with those settings on your computer?

Have you tried the alternative LeapFrog Connect Installer from the link below, although I suspect it could be a classic Windows 7 Driver problem.

http://www.leapfrog.com/en/pages/support/product_pages/leapster_explorer.html

it needs a software supported update . Find and download and use the software from the providers official website

I have the same problem and am trying to get a hold of them for the problem to be fixed. They keep telling me to clean the lense, or re download the books. The laser light won't even turn on. I can listen to the books just fine!!

Question   My computer meets all the minimum system requirements but when I try to download the LeapFrog Connect Application, I receive the error message "Your computer must meet minimum required System Configuration"   Answer   Please make sure your monitor resolution is set at 1024 X 768 pixels or higher and then try to download the application again.

Has the volume been good before? Here is an excerpt from a review on Amazon.com:
CONS: The TAG EATS batteries. Be sure to have a supply of AAA batteries on hand. The volume could use a boost; my daughters are sometimes holding the pen to their ears in order to hear the narrative (they're not too fond of earphones, so that's not an option for us).
If the volume was higher before, chances are that the volume control is bad. Not sure if you could get replacement parts, but you could try to contact them. Here is their support page:
http://www.leapfrog.com/en/pages/support.html
Wish there was a simpler answer for you. Good luck, thanks for using FixYa, and good luck.

hey m8 to fix the problem install it on your computer and click my tag once that is selected you should have a messeage come up saying update tag after you have done this the pen will work fine pal any problems give me an e-mail [email protected]

I experienced the same problem. The computer indicated that everything was synced and that the new story was on the pen. When clicking on the pen it would not announce the new story. I discovered that you have to actually press the pen tip on the story in the book and then it suddenly recognized the story on the pen. It could be a security measure to ensure that you have actually purchased the book prior to being able to use the story on the pen.

The problem was the firewall settings - Leapfrog provide a fix for this on http://www.leapfrog.com/support

Try pressing the on/off button to turn it off. I had a same problem. I depressed the on/off button for ~6 second or so and the device turned off. When I turned on again, the LeapReader no longer had a white light and was recognized by my computer.

Enter 1111 and it will say oops wrong password then enter 419 backspace and get rid of the 9 and then 27 worked like a charm took forever to find one that worked and this one worked for me once in change the 4 digit code to something ez

That's what I've been asking.??

Get a new Leapster

uefwiagyrskef

https://s7.leapfrog.com/is/content/LeapFrog/Site%20English%20Assets/Support/Download/Parents%20Guides/80-602000-LeapPad-Ultimate-Parent-Guide.pdf

my leap pad ultra is at that part of turning off wher their is only a dot of wite left on the screen.it is still doing that and it has been at least 2 hours since i played it. it wont turn on either now.i am a kid sorry if their are spelling errors

All parents are like to reduce the work load of their children. And here is the best essay writing service to reduce the work load for writing essay. And this dissertation writing services always ensures the best quality content and uniqueness of content.

During a normal shut down, the screen image on a LeapPad will reduce to a white dot, which will disappear in five to ten seconds. In rare circumstances, the white dot will not disappear and the LeapPad will not fully power down. If the LeapPad does not complete the shutdown process and the white dot remains on the screen for more than ten seconds, complete the shut down by pressing and holding the power button on the LeapPad for ten seconds. This will fully power the LeapPad down, and it will start up normally next time you power it on. For more information contact essay writing service reviews Essaypaperreviews com Best Writing Services Reviews online