20 Most Recent Intermatic Outdoor Timer/Photo Control HB51RC - Page 9 Questions & Answers

Could not find a manual for a DT300CL even on the Intermatic site. I did find one for a DT300 however. Hopefully they are pretty close and it will help you do what you are trying to dohttp://waterheatertimer.org/pdf/DT300-series-manual.pdf

Describe timer in detail. Intermatic freeze control will work with any 120 or 240Volt circuit: http://waterheatertimer.org/Intermatic-trippers-and-parts.html#PF11 PF1102 for 240Volt http://www.amazon.com/dp/B004I4MQII/?tag=waterheaterti-20 PF1103 120Volt http://www.amazon.com/dp/B0039QB128/?tag=waterheaterti-20 Neutral wire required. Add more detail for wiring diagram Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

http://waterheatertimer.org/Intermatic-timers-and-manuals.html http://i168.photobucket.com/albums/u184/jezza_photo/scan0001.jpg http://i168.photobucket.com/albums/u184/jezza_photo/scan0002.jpg Add comment and describe timer Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Contact hampton products.com http://waterheatertimer.org/How-to-set-timers.html Gene h If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Which timer?http://waterheatertimer.org/Malibu-power-pack-stopped-working.htmlAdd comment and describe timerGeneh If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

I think this is how it should operate: When the day skipper pin is pushed down on skipper-wheel.... ... the day skipper pin pushes a lever away from trippers... so the trippers will not engage the lever ... and the day of watering is skipped. Turn power OFF. Take off plastic cover over the wiring terminals. See if that is how it works, and look to see if something is missing. Here is close up based on Intermatic image of 14-day skipper wheel, and you can see (what I assume) is the skipper pin pushing a lever. http://waterheatertimer.org/images/Sprinkler-day-skipper.jpg Attach close-up photo of your timer. If you have digital camera, set to macro or tulip icon for close ups... otherwise phone cameras don't give clear view unless lighting is good. Assuming the timer is defective... I am not certain of Intermatic's warranty policy... except they have 1 year full warranty, and could send just the timer mechanism so you do not have to replace the box... steps: take photo of wiring, disconnect wires, snap or screw new timer into existing box, reconnect wires, and then send defect back to Intermatic.com. If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

try manually pushing lever as if you where the pin with a screw driver. maybe the pin needs to be mounted farther toward the edge of the disk to trip the switch completely?

Copy following links:http://waterheatertimer.org/pdf/How-to-operate-and-set-T104-timer.pdfhttp://waterheatertimer.org/Photos-of-WH40-timer.html#pointThe pointer is stationary at 6 o'clock or straight down position.Geneh If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Copy following link:http://waterheatertimer.org/Intermatic-timers-and-manuals.html#EJ351Geneh If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

There is not battery replacementBattery is built into circuit board as a capacitor.Buy a new timer:http://waterheatertimer.org/Woods-timers-and-manuals.htmlGeneh If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7