SanDisk 2GB microSD Memory Card - Page 2 - Answered Questions & Fixed issues

You can't (simply said). Only you and/or the person that created the password will be able to help.

Sorry, but only you (and possibly the previous owner) knows what your password is. You can try formatting the card but realize that you will loose any files that are stored on the disk.

What kind of Password? Was it encrypted with BitLocker or TrueCrypt? If either, and you don't know the password, you will have to format it (wipe it blank) and start over... Provided its one of the above scenarios. If not, may be able to brute-force it... Can you post a screenshot? -Jason I’m happy to help further over the phone at https://www.6ya.com/expert/jason_60e0f57ba319f3f6

PASSWORD OF CARD MICRO MEMORY TO HOW FROM PC TO REMOVE FORGET.....My Statement makes no sense... as does yours,... if you need a solution to your problem, Proof read your question before posting it, so others can help you

Is it possible the switch on the side is in the locked position?

it must be in hidden mode, either it must be asking for password, if u forgot password, format it, caution- whole data will be lost this may solve your problem

yes, this may be because your memory card is corrupt, or having virus, kindly format it, it will become all right,ok! caution- whole data in ur memory card will be deleted.

SORRY! BUT THERE IS NO GETTING AWAY EXECPT TO FORMAT MEMORY CARD, CAUTION- WHOLE DAT WILL BE LOST ADVANTAGE- PASSWORD WILL ALSO BE DELETED, AND YOUR MEMORY CARD WILL BECOME PASSWORD UNPROTECTED WWW.TINYURL.COM/9307740

What device is it being used in? How was it formatted before use? I would fromat it from your desktop with FAT or FAT32 and try again. Otherwise it may be defective. I’m happy to help further over the phone at https://www.6ya.com/expert/jason_60e0f57ba319f3f6

2gb memory card show only 121mb

You can try finding it with "my computer", click properties and then check disk for errors.

Take your memory card out of the camera and switch the position of the "lock" tab. One position is for "locked" (i.e., "Write Protected") and the other position will allow the card to be written to (unlocked). Some cameras have image protection built into the on-camera software and you may need to configure this there.

I find that the easiest place to find files on a HDD or SD card that i connect but the drive comes up is by going right click on computer and going to the manage option.

I then go down to disk management and look for the storage that I have added.

Then right click on "change drive letter and path" and add give the storage a drive letter

For some reason the computer sometimes does not complete this part which leaves the drive unreadable

It is always a good thing to do to go to device drivers to check that you can see the drivers for the device being installed. This can be achieved by removing and replacing the storage device while device manager is open

No idea what your problem is because you haven't asked a question.

how can i release write protect switch

1. Try to verify if the SD card is still working by plug it in on another known good source (example computer, camera... etc.)
2. If it not working you have to replace the card itself
3. If it is working on another source. try to go to device manager and uninstall / reinstall the drivers for SD card. by doing this right click on the SD driver itself and left click on uninstall. Right click on the "computer name" under device manager and then Click on "Scan for Hardware Changes"
4. If you have a cd for the sd card slot well and good
5. got to safe mode see if the SD card is detected on safe mode
6. Also you might want to scan the computer for any viruses

Insert the Memory Card to the card reader,
Then plug the card reader to the computer and perform the following setting to the computer.
Go to the Control panel,
Choose Folder Options
Then click on View.
Choose
Show hidden files and folders

and

Remove mark to the Hide extensions for known file types.

Again

Remove mark to the Hide protected operating system files (Recommended)

A Warning will Display Click OK.
Then Apply and Click OK.

Open My Computer and Go an Open/Explore your Memory Card for Backup of your data.


Copy a Data to the Computer and Format your Memory Card.

Before Restore you backup to the memory Perform the setting of file attribute to your data
Example of file Attribute is

Read Only
Archive
Hide

Right Click your Data
and then Remove a mark to the Hide in Order to view Your Data to the Memory Card.

Thanks a lot.

More Info; [email protected]
or
Call
+255 755723228

format to big for screen on my computer

The same thing happened to me last month. The card is probably bad and needs to be replaced. I hope you backed up your data. I tried everything but they just fail sometimes.

If you read it with a computer (laptop or desktop), you can check it using Disk Management: Control Panel, Administrative Tools, Computer Management (please run as administrator; right click it), Disk Management. Is the SC card info exist in this screen?