Planar PR3010 DLP Projector - Answered Questions & Fixed issues

0helpful
1answer

Planar PR3010 turns on (steady orange Ready LED & steady green Power LED), but there is no light coming from the bulb

most probably the lamp ballast is defective ,you need a new one
3/14/2014 12:11:41 AM • Planar PR3010... • Answered on Mar 14, 2014 • 181 views
0helpful
1answer

I have black spot on

you may need to clean it with a soft cloth that should help it may be dust
6/4/2011 8:19:09 PM • Planar PR3010... • Answered on Jun 04, 2011 • 58 views
0helpful
1answer

Won't turn on

Hello,

if it does not power up, then it means its having a power problem. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby not making it to power on.

This unit must have a power supply board in it where power enters from the mains. A capacitor, fuse, diode, etc may have been defective on the power board and maybe that's why its not making the unit turn on. There might also be some disconnection or something, inside the unit which is not making it to power on.

To actually find out what's wrong, you need to disassemble the unit with a screw driver and check what's wrong. You will be needing a meter in order to test the components on the power board, once you detect any bad component, you can make necessary replacement at any electronics accessories store withing our vicinity. This is the only way by which you can detect the problem.

Of course, testing the power board with a meter will require someone that has the ability. So it you can't, then you might be needing the help of a repairman or you can call a friend that has the ability to help you out.

I wish you the best of luck.

Take care.
4/9/2011 5:23:19 PM • Planar PR3010... • Answered on Apr 09, 2011 • 190 views
0helpful
1answer

How to replace the lamp in it

buy a new 1,then look in the menu for it.
5/8/2010 3:44:27 PM • Planar PR3010... • Answered on May 08, 2010 • 57 views
0helpful
1answer

Projector shuts off

try reseting the lamp timer and then replace the lamp if it works
5/8/2010 3:40:43 PM • Planar PR3010... • Answered on May 08, 2010 • 778 views
0helpful
1answer

My Ploter have error (no communication with controller - 95

I have the same problem..did u get the solution???
4/26/2024 9:14:10 AM • Office Equipment... • Answered 24 minutes ago • 965 views
0helpful
4answers

How many ounces of body lotion is 200 ML ?

200 ml is about 6.76 US ounces or about 7.04 UK ounces.
4/24/2024 8:53:54 PM • Office Equipment... • Answered Yesterday • 176 views
0helpful
1answer

Error code e000350-0002

'Make model (what it is)' is needed in questions like this, and in fact ALL questions!! But we can just guess.

Error Code Ir 3300 e350-3000 and e350-00002

Copytechnet https://www.copytechnet.com > ... > Canon May 1, 2018 - Put ALL the original boards back in the machine. Go to service mode level 2 & perform E355 clear. If this fails your machine is scrap. CANON iR2200 Error code E000350-001 Jan 22, 2007 error code :E0003-0002 canon IR 2880i Feb 5, 2018 Canon IRA C5540I Code E000354-0002 Sep 23, 2021 E000350-3000 on IRC4580 Sep 25, 2017 More results from www.copytechnet.com

Canon iR Advance 4245 - E350-0002

PrintCopy .info https://printcopy.info > code=E350-0002 Canon iR Advance 4245 ; Code: E350-0002 ; Description: System error ; Remedy: Contact to the sales companies. ..
4/19/2024 5:37:38 PM • Office Equipment... • Answered on Apr 19, 2024 • 50 views
0helpful
1answer

E6 on my ISMART 500 trojan. How do i fix it please

This link is the best I can come up with: How to fix E6 & E7 on Trojan treadmill solved!! (youtube.com)
4/19/2024 12:27:09 AM • Office Equipment... • Answered on Apr 19, 2024 • 15 views
0helpful
2answers

How do I fix this error SEr on conlog prepaid meter

Call your supply company.
4/17/2024 1:47:07 PM • Office Equipment... • Answered on Apr 17, 2024 • 913 views
0helpful
1answer

Im looking for an installation or service manual for a FINCOR IMO 3130 DC Motor Control

The series on the following link includes the model you are asking about. EMERSON FINCOR 2330MKII SERIES EQUIPMENT MANUAL Pdf Download ' ManualsLib
4/16/2024 2:27:25 PM • Office Equipment... • Answered on Apr 16, 2024 • 20 views
0helpful
1answer

Setting tax rate on Ativa KC-421

How to set up tax rate on Ativan 12 digit calculator
4/16/2024 1:16:37 AM • Office Equipment... • Answered on Apr 16, 2024 • 914 views
0helpful
2answers

Tech solutions mod# TS8000 lost power while shedding

You posted to the Category 'Cars and Trucks'? shedding? Help in the link https://www.google.com/search?q=Tech+solutions+mod%23+TS8000 All questions need 'make model (what is is)' as first 3 words. Thinking that this might be a 'shredder' gives better results, we also have a Shredder Category, so I moved it. Shredders have an overheat thermal cut out and also a thermal fuse. It may reset itself. https://www.google.com/search?q=Tech+Solutions+TS8000+shredding+no+power ..
4/14/2024 7:19:19 PM • Office Equipment... • Answered on Apr 14, 2024 • 20 views
0helpful
2answers

Tech Solutions TS8000 Shredder. Suddenly no power on mod TS8000

Edited for clarity. Full 'make model (what is is )' please first 3 words. Thermal cut out, thermal fuse, or burned out motor. They all have a suggested time limit for running them and is generally 20 minutes unless it is a commercial model and cost $1,200 to $4,000. https://www.google.com/search?q=Tech+Solutions+TS8000+shredding+no+power It looks to be a capable machine, but no parts from 'Shredder Parts dot com'. https://www.google.com/search?q=Tech+Solutions+TS8000 ..
4/14/2024 7:17:27 PM • Office Equipment... • Answered on Apr 14, 2024 • 22 views
0helpful
1answer

Can you help me with code for mega power tv

Try "supervisor" as the username (no password).
4/14/2024 7:07:36 PM • Office Equipment... • Answered on Apr 14, 2024 • 17 views
0helpful
3answers

I'm looking for a permanent job what can I do?

You should write good resume and then to search vacancies on job boards.
4/10/2024 2:36:35 AM • Office Equipment... • Answered on Apr 10, 2024 • 416 views
0helpful
1answer

Canon imageCLASS MF3010 Black & White Multifunction Printer. How do I fix Error E2 please?

Question edited for clarity.

Canon imageCLASS MF3010 - Error Codes

PrintCopy .info https://printcopy.info > model=imageCLASS+MF3010 Error Codes List page 1 · Code: E000 · Description: Startup failure · Remedy: (1) Check the connectors of the Fixing Assembly. (J101, J1011, J552 and J702) (2) ... ..
4/6/2024 1:10:35 AM • Office Equipment... • Answered on Apr 06, 2024 • 23 views
0helpful
4answers

RE: Vibe USB Turntable Model:

your choice of "Vibe" turntable could have not been worse.
Any serious Vinyl collector would not use such a cheap piece of equipment.
You Get What You Pay For is so very true in this case.
3/30/2024 11:17:37 PM • Office Equipment... • Answered on Mar 30, 2024 • 5,837 views
0helpful
1answer

Riso EZ 370E freezes abruptly while printing. How to fix please?

No one in North America has Risograph machines. Try this link https://www.google.com/search?q=Riso+EZ+370E+freezes+abruptly+while+printing ..
3/30/2024 9:05:56 PM • Office Equipment... • Answered on Mar 30, 2024 • 18 views
Not finding what you are looking for?
Planar PR3010 DLP Projector Logo

Popular Tags

9 questions posted

Ask a Question

Usually answered in minutes!

Top Planar Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66980 Answers

Are you a Planar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...