20 Most Recent Gestetner DSm635 Copier - Page 6 Questions & Answers

No Owner's manual? Try: http://www.manualslib.com/

Yellow 182806 clear/stop is the new code for color units. Ricoh changed it last year. You can reset it in sp mode 5 back to old if needed.

Inside the master disposal box is a black pressure plate. It cannot see the home position sensor. Remove it and check where the flag is for that plate. When properly repositioned it will operate again. Also, master sure that the disposal box set sensor is not popped out of its mount.

Cannot give that out. But can answer questions.

Hi You don't mention your PC OS version so I am giving you here: DSm415 415f 415pf download page a page where you can select your OS and then select the drivers you require for download. Cheers

Hi I found driver downloads and a user guide here Gestetner Downloads by using the multifunction machine drop down menu to select your model and click on it. This took me to a page with the manual & user guide links but also a link to a handy "How to install Downloads" page on the right hand side. Hope this is helpful, if so would you please register that with Fixya Cheers

Hi I found driver downloads here Gestetner Downloads by using the multifunction machine drop down menu to select your model, click on it and then "GO". This took me to a page with the driver link and also a link to a handy "How to install Downloads" page on the right hand side. Hope this is helpful, if so would you please register that with Fixya Cheers

operating manuals you can find them on googel browse

Unplug machine. Remove connectors to the hard drive. Does it boot up now? Yes, then replace the hard drive. No? Then the controller board is defective.

Needs the web to be replaced.

Dirty optics or needs new drum units.

Paper table is not moving. Check wire harness.