Top 20 HP iPAQ rx5915 Questions & Answers

1. urn on your HP iPAQ Pocket PC.
   
2. Use your stylus to tap on the "Start" menu.
   
3. Tap on the "System" tab.
   
4. Tap the "Screen" icon.
   
5. Tap the "Align Screen" button.
   
6. Tap the center of the cross-hair object carefully at each location as it moves around the screen.
   
7. Tap "OK" to complete the screen alignment.
   

Well I would think so. batteries cause all sorts of headaches even when brand new, so I personally would get a new one, install it charge it up for required period as recommended, and see if that works.

I did a hard reset and the problem was gone (I've lost all the calendar and contacts data but they were restored after making the synchronisation)

go to
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId=215348&prodSeriesId=3263043
and download the drivers after registering youself there and do burn a CD for future.

I got this info from HP website..

1. Press and hold the Quick Launch and Rotate Screen buttons.
2. While holding these buttons, use the stylus to lightly press the Reset button on the HP iPAQ until
the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the
Reset button.
The HP iPAQ restarts and powers on

It doesn't mention a password. I also have an HP Ipaq and don't need a password to hard reset. Good luck. If this helps you plz rate this. Thank you kindly.

What version of ActiveSync are you using? Open ActiveSync on the PC, then open "About ActiveSync" under the "Help" menu - it should be version 4.5. If not, download version 4.5 from Microsoft as a first attempt to fix the problem. If you are using 4.5, try uninstalling/reinstalling again but make sure you do a soft reset (push the pin on the top of the device) before you connect the Ipaq. If this doesn't work let me know and we'll try some other things.

. Press and hold the Quick Launch and Rotate Screen buttons.
2. While holding these buttons, use the stylus to lightly press the Reset button on the HP iPAQ until
the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the
Reset button.
The HP iPAQ restarts and powers on

seems like you have a problem with your charger.happened to me too.did you try charging the ipaq via the usb cable on your computer?

First checkpoint is the internal antenna - you can check this by getting hold of an external one (they're about AUS$20 off the net, make sure its got a MMCX connector). If that works, the internal antenna is detached/failed. This may be beyond a home remedy and require HP repair (or just settle for using the external antenna).

Try putting the files like this:
In My Device/iPAQ File Store/iPAQ GPS, put the folder with your country name (in my case it says Australia), the "Navigator" folder and the "GPS" and "Map ID" files.
In My Device/My Documents/Tom Tom you should have a file thats called something like "Australia-3bc66a12" (will be different for other countries), and another called "TTToday" and any POI files you've created.
See how that goes. Otherwise, you may be able to reinstall TomTom software from the original disk if you have it. Any map upgrades you've bought will need to be reloaded from TomTom Home

Hi,
Try This:-
To perform a factory reset and return your HP iPAQ to factory settings:

1. Press and hold the Quick Launch and Rotate Screen buttons.
2. While holding these buttons, use the stylus to lightly press the Reset button on the HP iPAQ until the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button. The HP iPAQ restarts and powers on.
Mike @ compurepair.

retrun it, cancel your credit card, go to paypal and they can resolve it.

Sounds like you've got the ActiveSync setting for the Calendar set to one-way from computer to PDA, not Synchronise, which means the computer will always over-write anything it finds on the PDA that isn't in the computer. Try uninstalling/reinstalling ActiveSync, and pay particular attention to all the settings when you reconnect the PDA and it sets up the connection - from memory at this point you can define the "direction" of synchronisation.

What maps it comes with depends on where you buy it. I have an Australian version which includes maps for all of Australia and works fine. Tom Tom update the maps periodically but an update is about A$150. It will also work with any other Tom Tom maps you have.

Remove the Activesync software...reinstall it.
Thats the best and fastest suggestion I can give you.
I have the same problem off and on.

What model HP iPAQ?

HP X13-04657, is 2007 PC THOSE this PC has CCFL back lamp strip that is dead.Vista era PC, laptops. are hard to work with now, 17 years old.is this not a HP COMPAQ presario HP X13-04657 (wrong name!) sorry !became HP in 2002. so is HP but manuals are super hard to find now. that x13 is part of the microsoft license code vista. (so is distraction to what it is)the real name of the Laptop is and was Presario CQ61 laptop CQ61 the PC has bottom sticker that shows the real names of PCs.CQ61-219TU is real name of on CQ61, there area many different sub codes, and they are not all the same.CQ61-306AX this had CCFL (cold cathode florecent lamps) that love to fail 3 waysdead, blinks ,dime or yellow = white.was made until 2009 and evolved, to LED backlamps.-410 is CCFLI will answer for CCFL as those just love to fail,but the the test is so easynow the answer for ANY laptop this old. 2007 and older. black screen all the time, and BIOS screens dead, answers only me. here. remove the main battery (large) it simply snaps off the bottom.the power pack is next we run the PC on your power pack AC to DC it must make the screen glow with something, do not use the wrong pack as in mixed up with others.now the lap top seems on, even the fan blows, LED glowpoint a flash lamp at the screen ,dark' room , and of you see any kind of LCD data on the screenthe CCFL lamp below #1 is bad.this is phase 1 testing, as other things can fail too. The keyword below is Mercurythis tells me it is those pesky CCFL glow tubes. 2007 is the year some PC went to LED back lamps. yes I was correct the service manual I did find proves they made both lamp types

Here are troubleshooting steps for when your computer won't start:

Question edited for clarity. Question translated to English. We only speak English on this North American website. https://www.google.com/search?q=hp+scanjet+8270+driver+windows+10

HP Scanjet 8270 Document Flatbed Scanner

Hewlett-Packard https://support.hp.com > ca-en > drivers > hp-scanjet-827... Download the latest drivers, firmware, and software for your HP Scanjet 8270 Document Flatbed Scanner ... drivers free of cost for Windows and Mac ... Windows 10 / ...

HP Scanjet 8270 Document Flatbed Scanner

Hewlett-Packard https://support.hp.com > ee-en > drivers > hp-scanjet-827... Download the latest drivers, firmware, and software for your HP Scanjet 8270 Document Flatbed Scanner. This is HP's official website to download the correct ...

HP Scanjet 8270 Document Flatbed Scanner drivers - Download

Softonic https://hp-scanjet-8270-document-flatbed-scanner-drivers.en.softonic.com Download the latest and official version of drivers for HP Scanjet 8270 Document Flatbed Scanner. This driver package is available for 32 and 64 bit PCs. It is ...

HP Scanjet 8270 Document Flatbed Scanner drivers - Free ...

Download.it https://hp-scanjet-8270-document-flatbed-scanner-drivers.en.download.it Download HP Scanjet 8270 Document Flatbed Scanner drivers varies-with-device. Software drivers for the 8270 flatbed model of the HP Scanjet printer. ..