Motorola Mobility H500 Headset - Answered Questions & Fixed issues

The default passcode is 0000 or 00000 or 00000000

Check is motorola has released a firmware update on your headset

you have a guide book bluetooth ? a password in there... check it out...
thank you...

i have htc smart phone i got motorola h500 bluetooth headset but its not shown signal in my mobile what can i do?

I think that's like the one I used to have, where you turned it on by flipping it open.

If you flip it open and nothing happens, then the battery is dead.

0000

Turn headset off, push and hold call button till light stays on (not flashing) you are now in discovery mode.

Don't unsync. Just sync with the new phone and it will connect without worries.

Hi,

The pass code is 0000 (four zeroes)

For additional details, kindly download the manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hpe this solves your problem. Thanks for using FixYa.

Hi,

The passkey is 0000 (four zeroes)

For additional details, kindly download the manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Thanks for using FixYa.

Starting with your headset turned off, press and hold the call button for more than 6 seconds, until the indicator light is steadily lit (you'll notice that the light will flash as if the headset was being turned on, but don't release the button at this step). You headset is now in pairing mode. Now, make your phone's bluetooth application search for new devices. After a while, the H500 will appear on the phone screen. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).

Hope it works for you.

Cheers! Carlos

Starting with your headset turned off, press and hold the call button for more than 6 seconds, until the indicator light is steadily lit (you'll notice that the light will flash as if the headset was being turned on, but don't release the button at this step). You headset is now in pairing mode. Now, on your phone, go to 'Menu > Tools > Bluetooth > Registered List > Add New Device'. If the phone's bluetooth radio is off, you'll be prompted to turn it on. Do it. After a while, the H500 will appear on the phone screen. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
Hope it works for you.
Cheers! Carlos

0000 4 zero's is the default for most headsets

Hello,

the default pin code for blue tooth is 0000. You can like wise try 1234 and 1111.

Take care.

check this website:
http://www.motorola.com/mdirect/manuals/QG-H500_9494A56O.pdf

try 0000 or 1234.

Try entering 0000

Make sure the head set is also in pairing mode. and also make sure you haven't already paired it previously. if it still won't find it it is incompatible or defective

It's 0000 (Four zeros)

hi all blue tooth pas codes should be 0000


hope this helps