20 Most Recent
SMC EZ Connect g SMCWEBT-G - Page 3 Questions & Answers
My router disconnects all the time
CONTINUAL DISCONNECTION OF WIRELESS CONNECTION There are a few things that can cause you to lose wireless connection with your wireless router. 1. Weak signal strength, check the signal strength on your wireless card. If it is weak move the wireless router away from brick or concrete walls and if possible locate the wireless router higher up. 2. Have you secured your wireless router from people near your from unauthorized access? i.e. change the default password, setup encryption use WPA2 or WPA, change the default SSID, and turn off SSID broadcast, and for added protection, enable MAC address filtering which allows only the MAC address/es of your wireless card/s to connect to your wireless router. 3. You could be getting interference from electrical sources such as air conditioners, arc welders, washing machines etc. If so, the power supply to the wireless routers and computers etc should be connected to a surge protection power board, better still connect your computer equipment to an UPS (Uninterrupted Power Supply). 4. Check the channels of the wireless routers and access points in your area and change the broadcast channel on your wireless router to an unused channel or one that is currently used but has the weakest signal strength. This will minimize interference with your wireless router from other wireless routers and access points in your area.
Adding Mac address
You can't change or add mac address. The problem is your router having some setting , that is need to change. Your playstation. Is OK.
How do i connect
first you must have an ISP Internet Service provider contract which will provide you with a modem and leads you can choose either a dial up usb or
an ethernet connection to connect to the internet or
if you have a laptop you can choose a wireless usb modem
which can work on a desktop aswell once you recieve the modem just insert the disk provided and follow the prompts to set up your new internet connection
during the setup process you will be asked for a password I suggest you make a log of all pass words used outside of your computer incase of memory lapses
if you already have an internet provider
you will have to open up your network connections
click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red X or a yellow exclamation or question mark ! ?
you will need to update or install the driver or it could be firewalled
click start control panel administration tools computer management device manager scroll to network adapters should see a yellow question mark? right click install drivers
the driver might be on the disc supplied by your ISP internet service provider
or the motherboard disc or you might download one if you dont have on a disk
Make sure you Ethernet is enabled in bios restart your computer during the boot up process you will see on your screen a certain key to press to enter set up (BIOS) press and hold that key to enter bios using arrow keys scroll to intergrated peripherals look for SiS On Chip Pci Device press enter scroll to SiS 10/100m press enter make sure its enabledihope it helps
Router key/password
What is the model and brand of the router. I can help once I have this info.
Im trying to change nat
- Open your web browser, type in the router's IP address (standard: 'http://192.168.2.1') and press enter.
- Click on Login, Advanced Setup, Firewall, enable it and click on apply.
- Click on DMZ and select Yes to enable DMZ.
- Enter the IP address of the PS3, which was assigned a static ip address to be kept under DMZ, and click on apply.
Hope this helps
Cannot configue slingbox through new
go to this site
http://support.slingbox.com/get/old-network-assistant.html
fill in the fields below and it should pop up a guide to enable port forwarding on your router.
I have a smcwbr145-n4 router.
First
- Press and hold the RESET button for more than 5 seconds
- Reboot router
This will reset router to the factory default settings
then
- You can login using your web browser
- Connect to your router with a wired connection
- Goto IP: 192.168.2.1 (in your web browser)
- Login username: admin
- password: smcadmin
Now you will be able to make any changes needed for your network
I hope this helps,
Magoo
I have a smcd3gn modem
Unfortunately, the SMC d3gn wireless component is not reliable. I have traded modems at the request of Rogers and am having the same problem. The solution is to disable the wireless function of the SMCD3GN and attach your own wireless modem. Help us get rid of the SMCD3GN @
http://www.facebook.com/home.php?sk=group_201874603172317
or search for
Rogers SMC wireless modem sucks at facbook.com
I have lost the user
Reset it and use the factory default PW.
NOTE: You will also have to set up your WAN again.
I need to log into my router which is an SMC
Normaly you do not need to open any ports for XBOX LIVE, XBOX LIVE uses the web connection that you'r XBOX uses to connect to the internet, unless you are using something i don't know, my son is using XBOX LIVE and i never had to open any ports on my router/fierwall.
if you can't remember the login for the SMC just reset it to factory, then login with SMC default user and password
My router is hooked up
There is no such thing as MTU For a cable ISP in routers !
However this error occur occur in gaming consoles mostly because there is something that is blocking the connection in the router .. Try the following Steps .. it might be helpful
You will have to open the following ports in your modem /router ( Contact your router manufacturer to do this )
Make sure the firewall is disabled in the Modem /Router
Make sure that UPnP is Enabled
Playstation Network Required Ports
TCP 80
TCP 443
TCP 5223
UDP 3478
UDP 3479
UDP 3658
Playstation Online Game Ports
Call of Duty 3:
UDP 3074
TCP 3074
MotorStorm
UDP 3659
UDP 3660
You can use http://whatsmyip.org/ports/ to test if the ports are open.
Not finding what you are looking for?