Soyo DYLTO32A 32 in. HD-Ready LCD Television - Answered Questions & Fixed issues

Hit menu on tv. If it comes up you may have a signal problem. If not then LIGHTLY tap screen to see if it has backlight or glow. If it does you have an issue with the panel or tcon board.

I have the same problem with my Soyo 32" lcd tv. Seems a lot of people do. Soyo went out of business, but I am going to see if it is the capacitors, like several people said on here.

This could be a inverter going out on you. A inverter is a device the downconverts the AC voltage to a low voltage for you lcd and other devices within when these down converters go bad you will have a symptom like this. It sounds like its irractic and intermittent witch confirms the diagnosis as a bad inverter inside. Please have it serviced will not cost much. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

I have the same problem and was told over the phone by a repair facility that the LCD screen is going bad. My tv has done this since i bought it and smacking the back of it with my hand stopped it til now.

it's your remote flipping out or the power supply is bad.

Diagram fps277-4f03 burned soyo power TV viore power fsp277-4f03 does not turn on I need a diagram English only on Fixya please. https://www.google.com/search?q=fps+277-4f03 make model (what is is)' and a clear question in English. https://translate.google.ca/ ..

That means there are no more updates for that TV. You might want to get a newer TV.

Go to home setting on remote. Go to audio settings on tv. Adjust sound from there down to suitable level.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electro-medical.blogspot.com/ If blinks continue without any pause, the main board is faulty. Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. Counting of number of blinks to Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Use the remote to choose the input. You can also use the menu button to find the inputs.

If your country uses the PAL TV system make sure the TV tuner is not set to NTSC.

There is a failed part inside the tv that is keeping it from powering up. You will need to have a repair shop look at it to get an estimate.

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD & Plasma screen are similar, irrespective of its brand and screen size.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://electro-medical.blogspot.com/

No.

You would have to replace the tuner board or maybe just good reflow If you need further help, I’m available over the phone at https://www.6ya.com/expert/richard_b59056c0c62ecb00

Replacing a flat panel screen will cost around 2/3rd of the total cost of a new TV [including cost of panel + service charges] http://electronicshelponline.blogspot.com/

Here ya go!!! http://video.englishmanuals.com/flat_panel_television/soyo/mtgvtl3227ab_32-428459.html If you need further help, I’m available over the phone at https://www.6ya.com/expert/ron_a476a70a75690d24

Check the back panel,side or under back panel....

028,021. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electronicshelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/ Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.