Compaq TFT5000 15" LCD Monitor - Answered Questions & Fixed issues
Horizontal lines tft5000 compaq monitor
Check your VGA/HDMI cable(the cable which is connecting the monitor and the system) try bloing air through the connectors and reconnect the cable properly. Hopefully this will resolve the issue.
I have compaq tft5000 15" lcd monitor when we
It is broken. Replace it.
If you look online for a "previously-owned" 15-inch LCD monitor, expect to pay $20 to $30.
If you go to any "big-box" electronics store, you can buy a 19-inch LCD monitor for under $100.
Either way, it's much less expensive to REPLACE it
than it would be for a professional TV/video technician to try to trouble-shoot and REPAIR it.
Only one time show ok display on power on than
This is an old monitor, I remember working on these many years ago.
Anyways, the backlight is bad. The CCFL bulb needs to be replaced.
It is cheaper to scour ebay or something to get another one if this is in a server tray than to get it fixed.
If not, just buy a new monitor. You'll see a world of difference in picture quality.
Power light blinks fast red
Hello All,
The problem with the fast blinking power light is caused by 4 capacitors in the power supply unit going bad. We have been repairing this model for 4 or 5 years and this is a very common problem. We have a kit with all of the parts and directions available for $15.00 plus $2.00 shipping. Let me know if anyone needs the kit.
[email protected] We can also do the repair for youif you are not confortaqble with disassembly of the ac power unit.
Hello
I need diagram conections , power suplyy 12 and 5volt of monitor compaq tft 5000s
[email protected]
thank you
Compaq tft 5005
Did the same and burnt a frazzled chip. it is on the 3rd circuit board (I believe it provides the lamp power). It is the 8
pin surface mount chip next to C900. As far as I can make out, the numbers on the chip are
4559
****
**7B
I was told it's the lamp drive.
If it is indeed lamp drive, then when you turn the monitor on, round the edges of a flashlight pressed to the screen, you should see a picture.
If there isn't one, you may have killed more than I did.
Is there no power regulator at the input?
Good luck
Out of frequency range set lower resolution
reboot the system by pressing F8 if your using windows OS and select last good configuration.
you can try also selecting Enable VGA mode (press F8 while rebooting and select ENABLE VGA mode).
hope this helps, please rate.
I want to install xp on compaq nx 6310 give the procedure with pendrive
2006 PC (HP.coM) 16 years old.. ouch.
XP (microsoft) is now a horrible virus magnet, and there is ZERO support now, are you using the last XP earth 2020???
gee google that. 2001 to 2007 was XP rein , vista 2007
I bet there are 1millons of web site still with XP usage .(old topics)
google them. but Microsoft purged theirs.
it is not sold at all, so how in the world can you get the installer on any pen drive, and XP installed from CD not pen..
worst of all XP installer, can not us 99% of all USB ports and then only half after the install (unless you force them via F6 and floppy drive with xp drivers on the floppy for THIS PC)
to use any relic PCs run LINUX> not XP
Not finding what you are looking for?