Top 20 Canon Elura 40MC Mini DV Digital Camcorder Questions & Answers

Looks as if it is worn out - replace it

I got the same problem

What you have is a bad tape mechanism. It can be replaced. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com.

This is most likely caused by a damaged or misaligned video drum and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

I would take it in and have it retrieved as it could damage it if i told you another method. A camera shop will take this out and if damaged fix it and put it onto a dvd of some sort for you for under $25 bucks respectively. I would never tell my clients to try to get the tape out if I knew it might in danger its contents actually we are not allowed to. I also hate telling you to bring the matter somewhere else but to entertain the best way of getting the tape out would be a expert and nothing more.


Thanks I hope this helps please do clic k the accept button for my efforts Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

What is the camera doing? Is it shutting off completely or is the screen turning off? Is the battery pack new or very old? How are the contacts between battery pack and camera? You can test battery with a voltmeter to see if it is holding or draining power after being charged.

It's the camera itself, it needs some fine tuning. I'd recommend finding a local camera repair shop before throwing in the towel on this one.

You are not alone. This is a known service problem for this series of cameras. Cannon has a service notice on its website. Look here:

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&keycode=2112&fcategoryid=227&modelid=9037

If you can plug into the a/c outlet and to see if it turns on. If it does turn on, it is your battery. You can buy batteris for those relative cheap.

install the cd driver camed with your camcorder to your pc and it should be recognizable after you install it. hope that helps!

cheers
CHARCOIS

Just found this info.

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=818&modelid=7511&keycode=2112&id=29819

Go to canon's website navigate to its download page for camcorders, then plug in information about your operating system and download the new driver for Vista. Restart your computer, plug in cable and camcorder. Should work.

Additionally if you want clean up your registry, use free Eusing registry fixer to fix most problems. It is a stable product.

me too

You write so little it's hard to tell what your problem is... Won't the tape door close? could you have the hinges reversed or something? Can you push them back the right way and then try and close it? Try loading a fully charged battery into it, or plug it into the wall AC. If you have more info please post again.

If you suspect that your JVC camcorder may have been damaged by plugging in the wrong power cord, it's possible that the cassette mechanism may not release as intended. However, you can try the following steps to manually release the cassette:

1. Turn off the camcorder: Make sure the camcorder is turned off and unplugged from any power source.
2. Locate the cassette release button: The cassette release button is usually located on the side or bottom of the camcorder near the cassette compartment. It may be labeled "eject" or have a symbol that looks like a triangle with an arrow pointing up.
3. Press the cassette release button: Press and hold the cassette release button for several seconds to see if it releases the cassette. You may need to press it firmly or use a pointed object like a pen or pencil to press it.
4. Manually release the cassette: If the cassette release button does not work, you can try manually releasing the cassette. Look for a small hole on the camcorder near the cassette compartment. This hole may be labeled "emergency release" or have a symbol that looks like a triangle with an arrow pointing down. Insert a straightened paperclip or similar object into the hole and press gently to release the cassette.

If you are unable to manually release the cassette, it's possible that the camcorder has been damaged beyond repair.

1. To transfer video footage from your Canon MV830i camcorder to your Macbook, you will need a FireWire cable and a FireWire USB adapter. This cable connects the camcorder to your computer, and the adapter allows the FireWire connection to be recognized by your Macbook. You can find this cable and adapter on Amazon or other electronics retailers.
2. To transfer the footage to your computer, you can use the built-in iMovie software on your Macbook. This software lets you capture the footage from your camcorder and import it into the program for editing.
3. You can reuse the tapes by recording the footage you have already captured. Make sure you have transferred the footage to your computer before recording it.
4. Some other advice:

• Make sure your camcorder is in VCR or VTR mode before connecting it to your computer.
• Test the connection and transfer process before filming important footage.
• Check the manual of the camcorder for detailed instructions on how to transfer footage.
• Be patient; transferring footage from a camcorder to a computer can take some time.

Remember that transferring footage from a camcorder to a computer can be a bit complicated, but with some patience and practice, you'll get the hang of it. Remember always to consult the manual of the camcorder for detailed instructions and always keep your computer and software updated.

If your Canon MV940 digital video camcorder is not charging when you plug it in, there are a few things you can check to try to determine the cause of the issue:

1. Check the power adapter: Make sure that the power adapter is securely plugged into the camcorder and that the outlet you are using is working. Also, check that the adapter is not damaged or malfunctioning.
2. Check the battery: Make sure that the battery is inserted correctly and that it is not damaged or worn out. If the battery is old or has been used for a long time, it may no longer hold a charge and will need to be replaced.
3. Check the charging port: Make sure that the charging port on the camcorder is clean and free of debris. If there is debris blocking the port, use a soft-bristled brush or a can of compressed air to clean it out.
4. Check the battery terminals: Make sure that the terminals on the battery are clean and free of debris or oxidation. Clean the terminals using a soft-bristled brush or a pencil eraser.
5. Check the firmware: If the problem persists, check to see if your camcorder's firmware is up to date. If it isn't, update it.

If you've tried all of these steps and you still cannot charge your camcorder, it's possible that there is a hardware issue with the camera. In this case, you may need to contact Canon support for further assistance. https://amzn.to/3WisSDI

To connect your Canon ZR 800 camcorder to your MacBook Pro using a Firewire connection, you will need a Firewire cable and a Firewire port on your computer. Here are the steps you can follow to connect your camcorder to your MacBook Pro:

1. Locate the Firewire port on your MacBook Pro. It is usually located on the side or back of the computer and is marked with a symbol that looks like a small lightning bolt.
2. Connect one end of the Firewire cable to the Firewire port on your MacBook Pro.
3. Locate the Firewire port on your Canon ZR 800 camcorder. It is usually located on the side or back of the camcorder and is marked with a symbol that looks like a small lightning bolt.
4. Connect the other end of the Firewire cable to the Firewire port on your camcorder.
5. Turn on your camcorder and set it to playback mode.
6. Open the video editing software on your MacBook Pro and choose the option to import video from a Firewire device.
7. Follow the prompts in the software to import the video from your camcorder.

I hope this helps! If you have any further questions, don't hesitate to ask.

It's possible that the video head is dirty or damaged, which is preventing the camcorder from playing back tapes. You may need to clean or replace the video head. As for the "No Card" message, it may be a default message that appears when the camcorder cannot detect a tape. Check that the tape is inserted correctly and try a different tape to see if the issue persists. If the problem continues, it may be a more serious issue with the camcorder that requires professional repair.