20 Most Recent HP PSC 1610 All-In-One InkJet Printer - Page 3 Questions & Answers

Are you getting error related to incompatible ink or Ink cartridge defective and this is Genuine cartridge purchased, then check for the Expiry date on the cartridge and call HP support to get assistance.If the cartridge is defective and if the cartridge is still in warranty, You can probably expect to get a replacement cartridge without charges.1-800-474-6836Regards,Sean

best thing to do is get rid of the used cartridges and use HP OEM ink products- they might be costly but will work when asked to and wont ruin the inside of your printer and force you to buy a new one- once you have used a third party ink all your HP warranties were nullified, THIRD PARTY INKS are NOT the way forward. their ink pigments are usually the wrong type and often not the right shade of colour, which will make colour prints look dull or poor colour calibration.

You need to purchase a cartridge designed to be used in the USA. The local cartridges are probably for Europe and are not the same.

try this.. i got the same problem before.. and the main problem is the NO MECH MODE.. try pressing the setup button then take the plug out of your printer.. (still pressing the setup button) and put the plug back.. and it will remove the no mech mode.. then you could print like before.. i hope this helps

Hi,You dont have drivers for Deskjet F2100. You need to connect the printer via USB cable and the printer will be ready to print. To SCan a file, you need to use paintbrush or any other image application tool.Regards,Sean

You write "type the above line at command prompt". I dont't know Where exactly to write? Can you tell me!

Remove scanner glass, refix CCD cable & try. If problem persists replace CCD ribbon cable.. CCD snap shot:

If you are getting a 'carriage jam' error as soon as you turn on your printer with no tasks in progress, then check for any piece of paper stuck in the carriage. Remove the paper carefully. If the paper tears, part of it might remain inside the paper path and damage the product.

Follow the steps for fix HP Printer Carriage Jam

• Turn off the printer and open it to see where the paper is stuck.
• Manually move the carriage toward the opposite side.
• Check the paper path and remove any piece of paper or any other object that is stuck in the path.
• Reconnect the power cord and turn on the printer.

Have you tried unplugging from power source then turning back on? Then try run a test page..

clean the printed circuit side of cartridge then try again