20 Most Recent Dell Precision 360n PC Desktop Questions & Answers

If your talking about the connection to your motherboard you will see small writing on the board that reads PWR thats where you plug in the power switch to your motherboard., please vote if this help thank you.

have u loaded the display drivers?
right click on the screen and go to properties and on the last option settings go and change resolution

Normally if you are looking at the back of the case, there should be 2 screws on the right edge and 2 on the left at the top & bottom. You should just have to take the 2 screws on the right-hand side out and the side should slide off.
I haven't seen your particular pc but should work.
Remember to ground yourself if your gonna be messing around inside the case. Just grab the case to discharge any static before touching your board and stuff.

It is supposed to run, Otherwise your computer will shut down because of overheating.

Hi there,
If you have the licens to the OS, then go ahed and install. The drivers for your dell Precision 360 can be downloaded from HERE:
let me know how you go (use the mail to get back to this page)


/Teis

Reboot into Safe Mode by repeatingly tapping on F8 while in process of rebooting and then select "last known good configuration". If that fails reboot again to safe mode and select safe mode with command prompt and in the command prompt type "chkdsk /f /r " <enter>

If that doesnt work do place your Windows CD into the Cd-Rom, reboot and select option "Repair"

Hi, you can download your Network driver on this link. Copy and paste this link on your address bar:

http://support.dell.com/support/downloads/driverslist.aspx?os=WW1&osl=EN&catid=5&impid=-1&servicetag=&SystemID=WRK_PNT_P4_360N&hidos=WW1&hidlang=en&TabIndex=

On this page there are 4 files results found for your Dell Precision 360n.

*Hope this will help you. Feel free to ask me. Drop me a comment and i would gladly help you.

Fauza
Hi
First things first:
1) You just change the power on button for other, on Radio Shack they have it.
2) cables that came from the motherboard to the ON/OFF SW. you have to soldering with the new Power Button, thats it. very easy task! you can use any power botton to fix this.
good luck

Chances are you just need to reseat memory. Make sure the slot in the memory lines up with the DIMM. Flashlight helps.
Below is a link about BIOS beep codes & what they mean
http://www.bioscentral.com/beepcodes/awardbeep.htm
There are others on the far right, like AMI ect

https://www.dell.com/support/kbdoc/en-us/000137253/a-guide-to-identifying-the-source-of-an-abnormal-noise-on-a-dell-pc

this 2007 year PC OLD, has many limits (CORE 2 is one) is this windows 10? 64bit> I bet not its CORE 2 old) I came with VISTA if MS loaded OS, or XP or RedHat Linux? what boot menu are you talking about.? F12? wild guess me, VISTA OS: (now zero support) in windows, we have disk manager, do all devices show up now? this is first, if not here, explorer can not work. lets do the correct order: 1: bios sees my media. (good) 2: then in device manager, it sees them, if not drivers bad. 3: then Diskmanager sees the devices, and must have drive letter or next. if letters missing right click device and add one. 4: explorer (This PC) fails to find it. if above fails sure. easy as 1,2,3,4 order, matters. can't see CD does that mean a disk or the whole drive? cant See HDD, is this HDD0 ,1,2, 3 or? how many HDD do you have, and are there SSD drives there and last what SATA ports are you using, some are limited. here is your DELL.com support page, (12 years later still here) https://www.dell.com/support/home/us/en/04/product-support/product/precision-t7400/drivers what HDD fails, does the PC boot at all? my wild guess NO. what OS what OS do you want to run, that be first thing to ask on any 2007 old PC, as Windows 10 will fail here. I Bet. for sure 64bit.

Could be a faulty psu or disk drive - suggest test both

If not data on the flash drive I suggest try reformatting the drive to remove any malware

Many Dell can be a bit funny about exactly what RAM they will accept == check what other owners say on the Dell website user forums ..

At power-on, use F12 (or F8) and select 'Repair' ... DO NOT let it 'reformat' your drive or you will loose everything .. If that fails, you may have to choose 'Factory Restore', but this will re-install Windows and you will LOOSE EVERYTHING !! SO == if you have another PC, I suggest move your disk drive to that other PC and copy off all your photos/music/videoa etc you don't want to loose before doinbg a Factory Restore ..

It's simple. If you still have a problem please take a look at manual in pdf file for this dell t3500. You can find it here for example: User manual for Dell T3500

Windows 10 is new and still in testing phase, new patches are released to fix bugs almost everyday. try running an update, make sure your hardware was compatible and the OS is installed properly, you do have the option to roll back if you want to. call 1-877-805-1027 for expert help.

PCProtect is malware. What is PCProtect exe . I would boot up in Safe Mode again, or Normal if you have to, and bring up Task Manager again (Ctrl-Alt-Del) and check to see if explorer.exe is running. If not, Click on File in the Task Manager toolbar, select New Task (Run), and type explorer.exe in the Open box and click OK. If all goes well, your icons and Start Menu will appear and you can start cleaning up. Otherwise, you could try again and type appwiz.cpl in the Open box to bring up the Programs and Features to remove any bad programs you may find. Malware removal can takes years of experience, so I will leave it at that to try for a starting point.

http://www.manualowl.com/m/Dell/Precision-T3400/Manual/187799?page=96 SAME HELP.