20 Most Recent
RCA F32650 32" TV - Page 2 Questions & Answers
F36665
Found this on page 55 of user manual. Hope it helps.Problem:Every time I turn on the TV, the Guide is on the screen Solution: The GUIDE Plus+ system automatically appears on the screen when you use the TV button on the remote to turn on the TV. You can turn off this feature by pressing GUIDE on your remote control and then select the Menu bar. Press the right arrow button to select Setup. Choose Review options and select OFF.
Screen strobbing
you have to check for a loose contact at the main board then you can check the flyback transformer which have leak. the the high voltage is arching at the picture tube.
JUST HAS A DARK SCREEN
Picture tube failure is very rare. It sounds that the horizontal output transformer, that supplies voltages to picture tube to work are not present. A damaged horizontal output transformer might be the fault. Contact any experienced service technician. This is a repairable fault.
Rca 32 rca 32
The repair of this problem will be near to or exceed the cost to replace it with a new flat screen. With TV prices at an all time low due to slack demand it is not cost conscious to repair it.
The tv keeps changing channels.
The problem is the tact switches on the front panel board inside the set. The entire "keyboard" can be ordered and installed. Have your model number ready. Just call Encompass Parts 1-800-638-3328 for information. If you are not registered as a repair center you will be charged retail price.
TV suddenly shut off - and now won't turn back on.
Did this unit fail after a power outage or passing storm? If so could be lost of component in the low voltage power supply circuit or degausing relay circuit. I would strongly suggest you seek help from a qualified repair center. Don not attempt to repair yourself...to dangerous.
My RCA F32650 32" TV keeps turning on and off. I
hi there! i hope this will help u find the solutiuons:
1. replace the power transistor at the horizontal section of your tv by desoldering . and buy with the same value, the store assistant in your area will do help you replacing the defective part of your tv. Thank You.
I kneed the price for a yoke
Would that be the scan coils? If so the only place would be through an RCA seller or maybe a tube could have one already fitted. Try the manufactures web site for guidance on a local dealer to you.
Hope that helps
My tv wont turn on the power button just blinks
Hello,
Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
I hope this will help in solving the problem........
Not finding what you are looking for?