Top 20 RCA 27F650T 27" TV Questions & Answers

See the instructions on page 21 of the manual available at http://www.retrevo.com/support/RCA-27F650T-TVs-manual/id/402dj495/t/2/

You must have its remote control to unlock it.

You are going to have the original remote and the owner manual to do this--Universal remotes never had or will have key features the original one has.

You must have its original remote control to unlock this Tv. It wont work with universal remote control.If you have't the original remote control, just buy a new one, borrow it from any of your friends or relatives, who own the same model RCA tv; just to unlock it. For details about the proceedings to unlock it, get into this blog site. Details are given there.electronicshelponline(.)blogspot(.)com in name Electro-Help

yes

hi there! if you know how to troubleshoot technically this will solve your problem.
1.check the horizontal section of your tv , there you will see the flyback system connected at the back of the picture tube, never touch it because there still a remaining voltage charge on it , electric shock might happens if you remove it improperly.
2. check all the components inside the horizontal section only & look for possible cold solder at board and fix it if you know how to use the soldering iron and Pumps.
3, replace the defective component if necessary thru the help of expert tv technician in your area. Thank You

If the picture here represents your TV's actual looks,a shop will have to come out.That is at least $50 for them to show up.1 hour labor@ $50-$60.Repair centers normally have a minimum parts price mark up of 20%.If you actually have a flat screen,it probably isn't worth repairing either because you can probably get a new one for around $350,new warranty and all that.I am just giving you the numbers and letting you decide but I am pretty sure I know what that will be.I joined here to inform and educate people who can be ripped off by industries without knowing it.I have seen too much of it and it's disgusting.Good luck,Greg

Hello
It is due to the tuner trouble of your TV. Technicaly it is known as tunig drift. Some tuneres will exibit this problem. It will be ok after some time, and will go normally. It will differ according to atmospheric temperature and mostly depends on humidity.
Replcing the tuner with same type and number is the only remedy. Tuners ar not repairable. Replace it. OK.

Hello

Most RCA and GE TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
4. Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

OK.

Hi:
IF you are on a cable box check the cables remote for a aspect button or format button. you may be in zoom mode. also check your tv's remote for the same buttons usually on rca remotes the left arrow key is the picture format button.

Hi, my name is John. Welcome to FixYa. Are you going to do this yourself?.John

Unknown password--ITC008 chassis with TV off press and hold volume down on the front of the tv and clear on the remote for 5 seconds

one try is to unplug the tv and then hold the power button in for 20 seconds then plug the tv in an see if this works. I had a 32 in rca tube an this worked for me

eeprom memory corrupted change it

HI. this may be a fly back situation. this is a transformer that is located on the power board section of your set. This device stores and, distributes the necessary AC current needed for proper CRT performance. There is also a horizontal deflection chip that will shut off the transformer if it becomes unstable as well.

I recommend checking the Horizontal deflection chip for damage. if this chip is in good condition, replace the HV Fly back transformer.

just do these connect AV output from your dvd player to AV input in your TV.

If you don't have a menu button on the front, you'll need the original remote.

thanks all fixed

I have a similar tv. Its specs. aren't clear about that point. It can get OTA digital via antenna, but my component connectors show no picture when hooked up. I guess if your cable co. sends digital signal it should work in the digital antenna input. Same one as for the OTA signals, and they claim no cable box is required.
I am awaiting any help and it may also apply to your situation.
Take care, breezelow