Samsung DVD-V3650 DVD Player/VCR - Answered Questions & Fixed issues

Hey!
You can use a video to dvd burner software which can help you convert your VHS' to DVD's. You can have a try of this Wondershare DVD Converter Studio which can help you burn DVD from VHS'. For more detailed info, you can get it at: http://www.dvd-ripper-copy.com/dvd-converter-studio.html#181.

Component connections between your DVD player and TV (they will be colored red, blue, and green) carry video only. You will need to connect two more cables for left and right audio channels. The connectors for these audio cables will be colored white and red for left and white respectively.

You can only compensate for minor scratches. As for the vcr side the rollers could be dirty or the brake worn out. The tensioner may be too sensitive as well. Basically the mechanism probably needs servicing.

Check that the time and date are set correctly and try again. Let us know how you get on by posting your results.

check if the remote control of the dvd got the video tipe pushbutton and use it

Hi,
Your fuse blown again because you have a short on the circuit. You may visit my link http://www.fixya.com/support/r8053361-fuse_keeps_blowing for more info.
I've suspect that you have short on rectifier diode/main filter capacitor/regulator IC/transistor. This is quite fixable.
Hope it may help you.
Thanks for using fixya.
JDVillanueva

The issue maybe the board in the players. Wipe the front to make sure the IR sensor isn't being blocked by a smudge, and if it still is intermittent you can try replacing the remote from the manufacturer. If both don't work the unit will need to be replaced if the intermittent working on/off is too much to bear :)

Hiu this code for DVD-3250, it may work for you.
1) remove disc and wait for "no disc" to be displayed
2) press "pause,, 3,1,4,1,5,9", Code-- will display.
3) enter code for region using numeric keypad( 09 may work for multizone).
4) press "pause, power"

alternatively DVD -V440
1) step 1 above
2) press"subtitle,7,6,8,8,4" then "9 (multizone), subtitle"
3) open & close drawer

Good luck
3

you can buy a cleaning disc from most supermarkets or electrical outlets

Try checking that the cables are plugged in correctly, also try to make sure that the videocassette isn't damaged or dusty in anyway. Try using a cleaner as well. Hope it helps

Good luck and let me know what happens^^

This sounds like a progressive scan issue (unit in P.Scan Mode) here is a C&P from the manual

Set "Alt Video Out"
Highlight "Alt Video Out", then press the RIGHT button to select
one of the following options:
• S-Video - Select this if you are using the S-Video OUT jack on
the rear panel to connect to a TV.
• Component - Select this if you are using the COMPONENT
VIDEO OUT jacks on the rear panel to connect to a
Progressive(480p) or Interlaced (480i) TV.
• See your TV owner's manual to determine what type of TV you
have.
- Interlace : Interlaced Scan mode will work.
- Progressive : Progressive Scan mode will work, and Video
and S-Video will not work.
• Press the Progressive button on the front panel if you have a
Progressive scan TV only. Otherwise, the picture will be
disturbed.

If you're trying to play through to your TV through the RF out on your combo unit, it's probably the copy protection that's stopping the playback. Try through the composite/audio jacks.

it sounds like your center channel or hookup is not working!

this player will not record copy garded material (this will not work! and yws the life of a VHS Tape is only about 15 years!

Just a hunch, but did you check the clock settings after the time change?

had the same problem..

bro you should take it to the repairer,No other options you have. it can't be fixed by doing anything accept changing it's screen or repairing it, if it's possible

Hello. You can check HDMI cable in this case. If you're using an HDMI port that's not working well or has been damaged, it could result in a darker-than-usual screen. If you switch the cable or change devices and the TV is at a regular brightness, this is the case.

It sounds like you might be dealing with backlight bleeding or an issue with the LED backlighting in your TV. This can sometimes occur over time due to normal wear and tear or manufacturing defects. If it started as a faint single brighter section and has now expanded to four, it's likely a hardware issue. While it may not be an easy fix, contacting the manufacturer's customer support or a professional technician would be a good next step to diagnose and possibly repair the problem. If you'd like, you can share the pictures for a more accurate assessment.

All I can advise is to take it to an authorised Samsung repair shop. A list is available on the Samsung web site.